World of Wood: Cubic Boron Nitride (CBN) Grinding/Sharpening Wheel, 8 inch, 5/8" Arbor, 180 grit (High Speed Steel Tools) Ideal for Sharpening Wood-Turning Tools, chisels, Plane Irons and More
Cubic Boron Nitride (CBN) Grinding wheels are state of the art technology for grinding high speed steel tools. <i> Different from aluminum oxide grinding wheels, the CBN grinding wheel cuts fast, stays cool and never needs dressing or shaping. </i>With proper care and only an exceptionally light amount of pressure when sharpening, you can sharpen your tools to a razor-sharp edge and will likely never need to buy another sharpening wheel again. This is the 180 Grit Grinding Wheel</br> These wheels are designed for use with <i>most</i> bench type grinders. 1800 RPM (Preferred) or 3600 RPM. Designed to run dry—no messy water to change. These are state of the art wheels, specifically designed for grinding tools, made of high-speed steel. Ideal for sharpening woodturning tools, chisels, plane irons and more <b>*high speed steel only*</b>! Provides a superior edge compared to stone wheels. CBN wheels last for years in comparison to standard grinding wheels. CBN wheels will never change shape—no need to dress the wheel or true it up. No need to readjust your jigs because of an ever-shrinking wheel. Balanced, does not require "truing" of the wheel. No more dressing or shaping like typical aluminum oxide wheels. <b> Important Note: </b> No water should be used with CBN wheels. Warranty may be void if water is used with the wheel. Thank you from us at <b> World of Wood </b> for the opportunity to be a part of your creative designs and ideas.
Cubic Boron Nitride (CBN) Sharpening/grinding wheels do not need to be balanced, trued, shaped, and they don’t wear. This state-of-the-art wheel is ideal for sharpening or shaping High Speed Steal.  Cubic Boron Nitride (CBN) is a man-made crystalline material which is one of the hardest materials in the world, just below diamond on the hardness scale. CBN is electroplated onto an aluminum wheel which has been balanced with precision. The wheel diameter does not change over time, maintaining the same grind on your tools for years.  Our CBN wheels come in 80 and 180 grit, achieving a super fine sharp edge with a polished bevel. They are 1.5 inches wide with a 5/8” bore. These wheels can make most any grinder preform at a much higher level, changing the way you sharpen forever. Caution: CBN Grinding Wheels are designed to be used to sharpen hardened steel or carbide. *Sharpening non-heat-treated steel, aluminum or other soft metals will damage the CBN Grinding Wheel. * -Helpful Tips- ~If there is run out, check that the wheel, washer, and nut are correctly aligned and perpendicular You may remove the guards with these wheels, which increases light and reduces shadow when sharpening. You should always use eye protection! ~Avoid sharpening high carbon steel as this loads the wheel up and fill in the pores. Sharpening carbide is not suggested either.  ~Dry grinding is fine for woodturning tools. In a heavy use industrial situation, a coolant is necessary to cool the workpiece. Installation Tips: 1) Remove guards on bench type grinder.  2) Slip wheel onto bare shaft of grinder. These may not slip on easily. They are made with very careful tolerances. Do NOT force them! A) Wipe the shaft off and try the wheel again.  B ) Repeat until the wheel slips on.
https://m.media-amazon.com/images/I/81ckWeQWtgL._SL1500_.jpg https://m.media-amazon.com/images/I/91W77MTO3ZL._SL1500_.jpg https://m.media-amazon.com/images/I/81HNkRI-m0L._SL1500_.jpg https://m.media-amazon.com/images/I/81ckWeQWtgL._SL1500_.jpg https://m.media-amazon.com/images/I/61ashnP1O+L._SL1024_.jpg
https://m.media-amazon.com/images/I/41eQmGdqFGL.jpg https://m.media-amazon.com/images/I/41o4AkgOwnL.jpg https://m.media-amazon.com/images/I/3119GRFaeCL.jpg https://m.media-amazon.com/images/I/41eQmGdqFGL.jpg https://m.media-amazon.com/images/I/51ebW+odcML.jpg
https://m.media-amazon.com/images/I/41eQmGdqFGL._SS40_.jpg https://m.media-amazon.com/images/I/41o4AkgOwnL._SS40_.jpg https://m.media-amazon.com/images/I/3119GRFaeCL._SS40_.jpg https://m.media-amazon.com/images/I/41eQmGdqFGL._SS40_.jpg https://m.media-amazon.com/images/I/51ebW+odcML._SS40_.jpg
MAIN PT01 PT02 PT03 PT04
World of Wood
{"Grit Material": "Aluminum Oxide, Diamond", "Brand": "World of Wood", "Grit Type": "Fine", "Grit Number": "180", "Construction Type": "Coated", "Is Discontinued By Manufacturer": "No", "Package Dimensions": "9.8 x 9.69 x 2.13 inches; 3.38 Pounds", "UPC": "711274824208", "Manufacturer": "World of Wood"}