content
stringlengths 50
665k
| pred_label
stringclasses 2
values | pred_score_pos
float64 -0
1
|
|---|---|---|
Most t20 international centuries
What the West must understand, however, is that Russia is no longer the special needs country it was just 20 years ago. Vanishing resources, we are spending
What the West must understand, however, is that Russia is no longer the special needs country it was just 20 years ago. Vanishing resources, we are spending our capital,.e., we are spending the earth's riches of rohit t20 highest score coal, oil and raw materials, as well as our inheritance of clean air, clean water, and places where one can be free from noise pollution. Clinton.2, Donald. While all these events changed the world, some can be seen as more important than othersbut which ones? The effects of the airplane can be felt in rohit sharma t20 career runs satellite and communication, business and commerce just to name a few. Long Telegram, a 5,400-word cable dispatched from the US embassy in Moscow to Washington that advised on the peaceful containment of the Soviet Union. The global food crisis A danger that the 21st century will bring very large scale famines to vulnerable parts of the world, because modern energy-intensive agriculture will be dealt a severe blow by prohibitively high petroleum prices, and because climate change. The right balance between global and local should be achieved. Just because George Kennan was no longer with the State Department, however, didnt mean that he stopped ruffling the feathers of predators. It will raise major ethical arguments. (since Vice President Kamala. A Twenty20, international (T20I) is an international cricket match between two teams, each having T20I status, as determined by the. International, cricket Council, the sport s world governing body. 8 or more characters. T20, world Cup news, fixtures and updates tailored to your favourite team. List of centuries in Twenty20 International cricket - Wikipedia ICC Men s T20 World Cup 2022
List of cricketers by number of international centuries scored
Ipcc report: Code red for human driven global heating
Since the end of World War II, the economy has achieved relatively steady growth, low unemployment and inflation, and rapid advances in technology. Long-term problems for the US include stagnation of wages for lower-income families, inadequate investment in deteriorating infrastructure, rapidly rising medical and pension costs of an aging population, energy shortages, and sizable current account and budget deficits. Note: the peak of Mauna Kea (4,207 m above sea level) on the island of Hawaii rises about 10,200 m above the Pacific Ocean floor; by this measurement, it is the world's tallest mountain - higher than Mount. During the 19th and 20th centuries, 37 new states were added to the original 13 as the nation expanded across the North American continent and acquired a number of overseas possessions. Trump (Republican Party) 304, Hillary. Failure of the media, war and conflict are blatantly advertised by television and newspapers. Trump.1, other.7 Legislative branch description: bicameral Congress consists of: Senate (100 seats; 2 members directly elected in each of the 50 state constituencies by simple majority vote except in Georgia and Louisiana which require an absolute. The statements, views and opinions expressed in this column are solely those of the author and do not necessarily represent those. The radio in the early 20th century served as a social bonding tool, a place of news, and education tool, and for emergency broadcasts, in short, providing an entirely new way for people to communicate and interact. We are losing species of plants and animals. There are now non-oppressive ways to lower the birthrate. In January 2009, Congress passed and former President Barack obama signed a bill providing an additional 787 billion fiscal stimulus to be used over 10 years - two-thirds on additional spending and one-third on tax cuts -. In cricket, a century is a score of 100 or more runs in a single innings by a batsman. The term is also included in century partnership which occurs when She plays as a hard-hitting lower-order batter, and scored the first century in a Women s Twenty20. She played in her 100th. To date, 116 cricketers have scored 15 or more international centuries, 77 of whom went on to score 20 or more centuries and 43 have 30 or more centuries. The Most Important Historical Events of the 20th Century
Issues in Twentieth Century Russia and Eastern Europe - StuDocu
20th-century international relations History Facts Britannica
Helens (2,549 m famous for the devastating 1980 eruption, remains active today; numerous other historically active volcanoes exist, mostly concentrated in the Aleutian arc and Hawaii; they include: in Alaska: Aniakchak, Augustine, Chiginagak, Fourpeaked, Iliamna, Katmai, Kupreanof, Martin, Novarupta, Redoubt, Spurr, Wrangell. We now have sensors that can detect the existence of a dangerous virus in the air and we are creating medical procedures to prevent illnesses from spreading. What are the challenges facing humanity at the beginning of the 21 century? The number of poor countries increases. So as you probably garnered from the title, today we are going to explore some of the 20th century's best inventions, things that have both shaped the world and your everyday life, so let's begin. Yet the United States, having snorted from the mirror of power for so long, will never be satisfied with the spectacle of Russians and Europeans playing nice together. Invented in 1903 by Wilbur and Orville Wright, the brothers brought to life a concept that was reserved for mythological stories. That bit of dry British humor cuts to the heart of the current crisis in Ukraine, which is loaded with enough geopolitical dynamite to bring down a sizable chunk of the neighborhood. Needless to say, Kennans warnings fell on deaf ears. Last month, Foreign Minister Sergey Lavrov rohit sharma total runs in t20 reported that President Putin had spoken with the leaders of Cuba, Venezuela, and Nicaragua, for the purpose of stepping up collaboration in a range of areas, including military matters. As for the Russians, Kennan continued, they would be forced to accept natos program of expansionism as a military fait accompli, thereby finding it imperative to search elsewhere for guarantees of a secure and hopeful future for themselves. Five players have scored 60 or more centuries in their international career across the 3 formats. Many of these changes are unprecedented, and some of the shifts are in motion now, while some - such as continued sea level rise - are already irreversible for centuries to millennia, ahead, the report warns. Check out the list of 20th century historical events below and vote up the ones you feel are most significant, and vote down any that seem less important. International, purchasing and Supplier Management (SCM880). The International 2021 (2020 TI 10) - Dota Top 10 inventions in 20th century
Why isn t America listening to the advice on nato
0.7634 (2013 est.) Japanese yen per US dollar: 111.10 (2017 est. The threat of nuclear war Despite the end of the Cold War, the threat of a nuclear catastrophe remains severe. Created in 1926 by, john Logie Baird, the television was one of the first inventions to affect the lives of masses all over the world, and to this day still remains the most popular ways of getting information. Think about how much smaller the world became once commercial flights were possible. Internet Ah, the internet. (Democratic Party) 306, Donald. And we have the right to ask: against whom is this expansion intended? Transhumanism will be highly controversial. Area total: 9,833,517 sq km land: 9,147,593 sq km water: 685,924 sq km note: includes rohit sharma last t20 innings only the 50 states and District of Columbia, no overseas territories country comparison to the world:. In his book "Civilizations Crisis in the 21 century John Scales Avery points out economic inequality that today.7 billion people live on less than 2 a day1.1 billion on less than 1 per day. We cannot manage to grasp the entire depth and essence of such changes in due to time. Everything public cramped living quarters. Believes that women in socialist societies are more Believes in repurposing socialist ideals in the 21st century. How We Survived Communism and Even Laughed - Slavenka Drakulic. What Are the Most Important Inventions of the 20th Century Oman t20 results
Comments: Most t20 international centuries
• Eguna say:
ICC Men s Test Player Rankings ICC .20th-century international relations, history of the relations between states, especially the great powers, from approximately 1900 to 2000.
• Namywog say:
Great 20th Century Inventions From 1900 to 1949 .The second half saw the replacement, largely through the agency of those wars, of the European state system by a world system with many centres of both.
• Yrebuma say:
20th Century Fox Television - CLG Wiki .The 10th tournament of The.
• Dytof say:
127 years of modern automobile evolution 19th century .International series was slated for August 2020.
• Ocivuli say:
Trade and Globalization - Our World in Data .However, for objective reasons (covid-19 pandemic the tournament was postponed for 1 year.
• Uqerama say:
8 20th Century Inventions that Changed the World .Due to the postponement of The.
|
__label__1
| 0.873632
|
An Etymological Dictionary of Astronomy and Astrophysics
فرهنگ ریشه شناختی اخترشناسی-اخترفیزیک
M. Heydari-Malayeri - Paris Observatory
Number of Results: 6 Search : technique
heterodyne technique
تشنیک ِ هترودین
tašnik-e heterodin
Fr.: technique hétérodyne
superheterodyne technique.
heterodyne; → technique.
Imaging Atmospheric Cherenkov Technique (IACT)
تشنیک ِ وینهگری ِ چرنکوف ِ جوی
tašnik-e vinagari-ye Čerenkov-e javvi
Fr.: téchnique d'imagerie Čerenkov atmosphérique
The method used to detect very brief flashes of → Cherenkov radiation generated by the → cascade shower of → relativistic charged particles produced when a very high-energy → gamma ray (in the range 50 GeV to 50 TeV) strikes the atmosphere at a typical altitude of 10 km. Owing to this technique, it possible to discriminate cosmic gamma rays from the cosmic ray background and to determine their energy and source direction. More specifically, the incoming gamma-ray photon undergoes → pair production in the vicinity of the nucleus of an atmospheric molecule. The electron-positron pairs produced are of extremely high energy and immediately radiate in a → bremsstrahlung process. This radiation is itself extremely energetic, with many of the photons undergoing further pair production. A cascade of charged particles ensues which, due to its extreme energy, produces a flash of Cherenkov radiation lasting between 5 and 20 nano-seconds. The total area on the ground illuminated by this flash corresponds to many hundreds of square meters, which is why the effective area of IACT telescopes should be large.
imaging; → atmospheric; → Cherenkov; → technique.
interferometric technique
تشنیک ِ اندرزنشسنجی، ~ اندرزنشسنجیک
tašnik-e andarzanešsanji, ~ andarzanešsanjik
Fr.: technique interférométrique
An observational technique based on principles of → interferometry.
interferometric; → technique.
laser cooling technique
تشنیک ِ سردش ِ لیزری
tašnik-e sardeš-e leyzeri
Fr.: technique de refroidissement par laser
laser; → cooling; → technique.
superheterodyne technique
تشنیک ِ اَبَر-هترودین
tašnik-e abar-heterodin
Fr.: technique superhétérodyne
The technique used in a radio receiver in which the frequency of an incoming signal is changed by adding it to a signal generated within the receiver to produce fluctuations or beats of a frequency equal to the difference between the two signals. See also → mixer.
superheterodyne receiver; → technique.
تشنیک، فن
tašnik, fann
Fr.: technique
From Fr. technique "formal practical details in artistic expression," noun use of adj. technique "of art, technical," from Gk. tekhnikos, from tekhne "art, skill, craft, method, system;" cognate with Pers. tarâš- "to cut, hew; scape; shave," tišé "axe," as below.
Tašnik, related to Pers. tarâšidan "to cut, hew; scape; shave;" Mid.Pers. tâšitan "to cut, cleave; create by putting together different elements;" from Av. taš- "to cut off, fashion, shape, create," taša- "axe" (Mod.Pers. taš, tišé "axe;" tarâšidan "to shave"), tašan- "creator;" cf. Skt. taks- "to fom by cutting, tool, hammer, form," taksan- "wood-cutter, carpenter;" Gk. tekton "carpenter," tekhne "art, skill, craft, method, system;" L. textere "to weave;" PIE *teks- "to fashion."
Fann or fan, from Pers. fan "way, manner, mode, art, science," related to Mod/Mid.Pers. pand "path, advice, counsel;" Khotanese pande "road, path;" Ossetic fœndœg "path, road;" O.Pers. paθi- "path, way;" Av. paθ- "path, way," variants paθi-, paθā-, pantay-; cf. Skt. pánthā- "road, path, course;" Gk. patos "path, way," pontos "sea;" L. pons "bridge, path;" P.Gmc. *finthanan "to find;" E. find; PIE base *pent- "to go, to tread."
|
__label__1
| 0.864804
|
logo [F -ka] logo
Blog - freeamfva
What is ODM Service for Perfume Bottles Manufacturing
28 maja 2022, 04:56
Ocena 0.00
What is ODM Service for Perfume Bottles Manufacturing
Professional perfume bottle manufacture services often employ OEM and ODM techniques. Both these services are crucial for the smooth running of the perfume industry. In OEM services, the perfume bottle manufacture is completed as original equipment by the supplier. Then, perfumers use these bottles to store their perfumes and sell them further to customers. In OEM, the perfume bottle manufacture is based on the perfume bottle decoration and design suggested by the perfumer.Get more news about odm fragrance bottle,you can vist our website!
On the other hand, ODM services use a different approach. Here, the manufacturer creates many original designs themselves that are available as samples to the perfumers. These perfumes can make slight changes to the design and order them from the original design manufacturers. In this case, the manufacturer has control over the product design.
1. Design
Forming the concept is the first step in OEM and ODM perfume manufacture. In OEM, customer requirements are the basis of concept formation. In ODM, the focus is on an original design idea based on the manufacturer’s discretion.
1. Modeling
Next, 3D models are made using computer systems to consider the different aspects, including the shape and style of the final perfume bottle.
1. Rendering
The prototype is built with the finishing layer applied to the perfume bottle. Different techniques are used to consider how the best sample can be created.
1. 3D Mockup
The 3D mockups may include the use of computerized systems or physical mockups of the products. Such mockups can be presented as prototypes for the customer.
1. Create Mold Sampling
Once the customer confirms that the given ODM or OEM prototype meets requirements, the sample product phase begins. Usually, the time a little longer than a month (30-35 days for glass while 40-45 days for plastic molds) is required to complete this mold production. Once the mold is ready, the next step is to prepare pre-production samples for final checking. Only after the samples get client’s approval, the perfume bottle manufacture can move to the actual production stage. Different perfume bottle decoration styles are tested in this phase to determine the best look for the product.
: :
Podziel się
Ostatnie komentarze
Najczęściej oglądane
Więcej informacji w naszej Polityce prywatności
|
__label__1
| 0.856015
|
Food for Thought
7 Things I Wish I'd Known When I Was Battling Depression
By Andrea Wachter, LMFT
I spent many years in and out of depression, and while I felt very much alone at the time, I know now that I was not. Millions of people battle the dark depths of depression every day. Like many others, I kept most of my painful thoughts and feelings to myself. When I finally got desperate enough to reach out for professional help, it took a long time for me to actually believe and integrate the guidance that I was given.
Here are some key truths I have come to believe. If you are struggling with depression, I hope you will too.
1. Don't believe everything you think.
We all have our share of losses and challenges in life. But the main cause of depression is not usually our life circumstances. It is our thinking. Unfortunately, when we are depressed, we tend to believe our thoughts. And the mind of a depressed person is not usually the best place to hang out. When I was battling depression, I wholeheartedly believed every thought that popped up on the screen of my mind. My thoughts seemed and felt so true. I even gathered evidence to support them and ignored evidence to the contrary. For example, when I was single and feeling lonely, I only saw couples out in the world. My mind refused to take in that there were millions of single people around me as well. Not to mention millions of unhappy couples. If I was struggling with a recent weight gain, I only saw thin, confident looking women. My mind refused to see anyone else. It was as if my depressed self was on trial and my mind was the prosecuting attorney gathering evidence that I was not okay and that everyone else was. Eventually, after lots of help from others and a good dose of willingness from within, I learned that I could take a stand against my internal programs. I learned that I could disagree with my discouraging thoughts and eventually dispel them for good. You can too!
2. Do the opposite of what the "voice of depression" suggests.
As a psychotherapist, I often find myself encouraging people to follow their hearts, listen to their true feelings, and go with their intuition... unless they are depressed. That's because when we are lost in depression, we are not in the best position to make wise decisions regarding self-care. My "voice of depression" used to convince me to isolate, veg out all day, oversleep, binge, starve, get high or give up. I had to learn to do the opposite of what that internal voice was telling me to do. I had to learn that when I was depressed and thought I should isolate, I should do exactly the opposite and reach out to a friend or attend a support group. When the voice of depression told me to watch TV all day, I had to push myself to take a walk or listen to a self-help cassette tape (remember those?) When my mind told me not to eat breakfast because I wanted to lose weight or because I had no appetite, I needed to do the opposite and eat a nutritious meal anyway or I was going to set myself up for yet another binge followed by even deeper depression.
Unfortunately, depression zaps the energy we need to do the very things that will make us feel less depressed. Learning to do the opposite of what your voice of depression suggests will help you begin to climb out of its painful and familiar grip.
3. Don't open virus-infested links.
We don't usually have a choice about what thoughts pop up in our minds. But we do have a choice about whether or not to open those "virus-infested links" containing the same old self-sabotaging thoughts. Rather than allow our thoughts to infect our whole system, we can choose to only download ideas we know to be safe and user-friendly. So if you know that your "unkind mind" is operating, you can choose to close it and only open up what you know are safe programs. If you know that a certain link will tell you "I am a loser," decide to download the "This is what's okay about me" message instead. Instead of opening the "My life sucks" link, you can choose the "These are some things that are good about my life" podcast. Avoid the virus that says, "Everyone has a better life than me" and download "Here are some things I'm grateful for." With willingness and practice, you can prevent yourself from getting an emotional virus.
4. Upgrade your mantras.
Whether or not you consider yourself to be a spiritual person or believe in the concept of mantras, we are all constantly repeating internal messages to ourselves. Our minds are mantra machines, and whether our messages are kind, neutral, unkind or abusive, they make an enormous difference in the quality of our lives. I used to have a mantra that went something like this: I'm too weak to handle life. I'm not cut out for this. Things are never going to get better. Not exactly an Oprah pick-me-up! I had heard of the self-fulfilling prophecy that if you tell a child they are stupid long enough, they will begin to believe it and act that way. But here I was self-fulfilling my own prophecies. I had to begin to pry my gripped fingers off of my internal whip and set it down. I had to practice some new mantras that were kinder and as it turned out, more true.
My upgraded mantras sound more along the lines of this: I can handle what happens. Everyone has struggles. I am safe in this moment. I can do things to improve my life. I am worthy. We are all the same on some level. I learned that even if I didn't believe them at first, it was an upgrade in the system and I had to start somewhere. Plus, the people that told me to speak to myself with more kindness swore that it would eventually make a difference and I knew where they lived if it turned out they were wrong! They were not wrong.
5. You are not alone.
I remember the first time I asked someone if they ever thought about suicide and they said they hadn't. I was floored. "Never?" I asked. "Not even once?" It simply never even occurred to me that everyone wasn't battling those dark thoughts; that everyone wasn't as sensitive as I was, and that everyone wasn't deciding whether or not to stick around and choose life. But it's true. We are all different breeds and some of us are more sensitive and thought-filled than others. Yes, we all face hard times and we all -- regardless of fame, fortune or physique -- will face losses. But some of us have a darker internal experience than others. It's important to find people who reallyunderstand and can handle your pain and your dark thoughts, people you feel totally safe with.
I also remember the first time I confided in a friend that I was suicidal. She was completely silent. I'm talkin' not one word. Poor thing. I know now she had zero skills to deal with such intense information and we were pretty young at the time but it left me feeling even more alone and despairing. It would be years before I would risk sharing my dark secret again; however, the next time, I chose a professional who really got me and really knew how to respond. Boy did I feel the difference! It's so important to seek out loving, compassionate, non-judgmental people until you can be that way toward yourself. If you are looking for a therapist, consider someone who has Cognitive Behavioral Therapy (CBT) skills as well as Mindfulness Training. CBT will help you learn to challenge and change your thinking and mindfulness will help you learn to live without becoming lost in your thoughts.
6. Something needs to die, but not you!
Being a sensitive person in a demanding and often perfectionistic world is not easy. I spent years thinking I just wasn't cut out for this life. My go-to thought when things felt overwhelming was "I'm outta here." It's hard for me to believe that now because I'm so committed to seeing this life through. I've learned that difficult feelings pass and that not every thought needs to be camped out on. But back in my dark decades, I truly wanted out. A lot. Sometimes my way out was through addictions and sometimes it was truly wanting out.
What I know now -- and I hope, if you are in the grips of depression, that you will know too -- is this: If your mind is telling you that you need to die, it might mean that something does indeed need to die, but not you! Your perfectionism might need to die. Self-hate might need to die. The belief that you can't handle life might need to die. The thought that everyone else has a charmed life might need to die. The thought that you are alone and that nobody cares might need to die. But not you. Underneath the habitual unkind mind is a quiet, loving heart with passions, ideas and dreams. Once you let go of your self-negating thoughts, all those other parts of you can be tapped into and lived to their fullest.
7. One chapter is not the whole book.
When you are struggling with depression, it is so tempting to think that this is the way it will always be. But life takes different twists and turns, and we don't get to know what the next chapter in our life will bring if we give up on ourselves. One client spent years comparing herself to her seemingly happily married friends and felt desperately lonely. Despite my weekly reminders that life stories can change, she was convinced that hers would not. But her story did change. She is now married and enjoying her new chapter in life. Additionally, a few of her previously "perfect and happy" friends are now divorced. I'm not one to say I told you so. I am just one to say that things can change. We all experience sad, challenging chapters in our lives, just as we all experience change. Regardless of whether or not our outside circumstances drastically shift, if our minds change, everything can change. This is why some people have what is seemingly a dreary job and swear that they are the happiest people on the planet, while others have literal fame and fortune and yet struggle with addictions and depression or even take their own lives.
So if you are battle weary from depression, try challenging your next dark thought. Try doing the opposite of what your voice of depression suggests. Upgrade your daily mantra to something kinder and more grateful. Allow a harmful thought pattern to die. Try reaching out to someone who really understands you... and see how the next chapter unfolds!
Reprinted from: HuffingtonPost March 2015
← Return to InnerSolutions Blog Entries
|
__label__1
| 0.868022
|
Park Chan-wook and Ultra-Violence: A Fascinating Two Decade Journey, from Obsession to Abhorrence
Decision to Leave
Expectedly, South Korean filmmaker Park Chan-wook’s latest feature Decision to Leave is set to make its debut at the Cannes Film Festival 2022. Two decades after Oldboy (2003) premiered at Cannes and won the Jury Prize, it wouldn’t be any surprise if Decision to Leave too leaves a positive mark on this year’s edition. The focus here is not on the garnering of awards and/or critical acclaim. What is fascinating is Park’s evolution of his cinematic expression of ultra-violence on the human body, both male and female, over these twenty years.
Park’s unique language of violence did not begin with Oldboy, though. A year prior, fresh from his first major domestic success Joint Security Area (2000), Park pivoted to unleash a cinema of stylistic nihilistic viciousness. The human body became his sole focus, his blank canvas which he ‘creatively’ destroyed, again and again. Sympathy for Mr. Vengeance (2002), his ironically titled first film of a seemingly urgent triptych, is a heady dizzying introduction to a very specific world of individual physical and psychological warfare. Park’s eagerness for how to devise unanticipated nasty and ruthless episodes made his characters run completely amok with degraded ideas on how to inflict immense harm on others.
Oldboy (2003) and Sympathy for Lady Vengeance (2005) soon followed, and Park seemed to be thoroughly tripping over his newfound language of bodily combat. Oldboy explicitly drew attention to its precisely choreographed sequences of bloody gruesome fights and acts of self-abuse. Like Sympathy, it was personal anarchic revenge at play in its complete bloody malicious glory and overflowed into his next, Sympathy for Lady Vengeance (2005). Protagonists’ gender changed, yet it was more of the same, in deceptively ‘new’ packaging. The ways to torture and kill a person has infinite possibilities and it took one filmmaker to relentlessly tap into this for his films.
I’m a Cyborg, But That’s OK
The way violence was portrayed on screen in South Korean cinema radically changed all thanks to Park. His influences rapidly spread within the industry. The filmmaker, however, immediately made a very curious turn. Just a year after Lady Vengeance, Park made I’m a Cyborg, But That’s OK (2006), truly an off-kilter entry in his filmography. Yet, Cyborg became the beginning of Park’s own purging of his obsession.
Cyborg’s thematic and visual flavors were gentle and blatantly tender. The only extended sequence of conflict is CGI rendered and surprisingly cathartic and even slightly amusing. The blood thirsty characters of Park’s vengeance films disappeared. Violence no more wasn’t the case as much as it being made to be fantastical with no grave damage inflicted upon others. Significantly, it became an innocuous self-fulfilling endeavor. The tenor and purpose of violence had changed.
Cyborg opened new doors and Park swiftly returned to his own prior hyper-stylized, visually eye-catching cinema of cruelty but furthering Cyborg’s themes. Thirst (2009) was undeniably seductive, but acts of brutality were rendered painful and full of guilt when wreaked on others. On the self, it became a means for inducing pleasure. Park slyly combined the two contraries and when the hunt for pleasure begins, Thirst contains and destroys its own perverse tendencies rather than aggravate the world with it.
Park reached a stage where not only acknowledged his own relationship with blood and gore in his cinema, had evidently had enough of it. If there was any lingering doubt about this, Stoker (2013) dismissed it with an apt intimate admission. An act of murder becomes a stimulus of arousal to which the protagonist eagerly consummates to great self-satisfaction and relief. Park refusing to return to the vengeful worlds of his previous films, emphatically makes them do a complete disappearing act. Stoker was Park’s own admission that the very act of killing and thinking of how it happens made him go orgasmic, hence his extravagant expressions of body horror onscreen. It gave him intense pleasure.
What also became instantly evident is how Park freed himself of his fetish. It was within his trilogy of trilogy Cyborg, Thirst and Stoker that Park brought women front and center to create an environ for reflecting on and ridding himself of his fixation, thereby enabling him to move forward in his filmmaking journey. Where to, though?
2016 saw Park’s lush period drama The Handmaiden receive widespread acclaim. Park refined his thinking further. The Handmaiden specifically channelled the brutal physical and psychological male violence regularly perpetrated on women. At the same time, eschewing bloodshed, Park reduced this same to fiction. The Handmaiden presented a world where devious men could only helplessly consummate their arousals in their revolting Imaginations. They are eventually relegated to insignificance, who can do nothing but await their end. Women however, thrive in love and healthy relationships.
The Handmaiden
Park had changed. He not only steered clear of his persistent preoccupation, but women became his inspiration for this change as he assuredly created a world of non-violence with intelligent, enabling female protagonists. Park completely transformed into a filmmaker abhorrent to the very idea of physical warfare of any kind onscreen. It took about a decade and a half for him to continually find layers to unpeel and rid himself of his fascination that he so loved to focus on, when he began his career.
Decision to Leave
So, where will his latest, Decision to Leave, figure in his oeuvre is a very intriguing and pertinent question, not least because of his choice of female muse, Chinese actress Tang Wei. Tang, no matter how many accolades she wins in her career, will always be known for her debut in Ang Lee’s Lust, Caution (2007) where her role was defined by her physicality. Her nude body was consistently on full display as she navigated a forceful, violent and violated physical relationship with a man. It seems no casual coincidence that Park has cast her in his latest, a tale of illicitness and murder a.k.a. violence. It doesn’t matter if Decision to Leave leaves Cannes 2022 with glory or is divisive in its reception. My curiosity is parked at where and how Park moves along further in his own unraveling from the theme of violence. Is there more to unpack or does he take a sudden turn to a new direction? I can’t wait to find out.
|
__label__1
| 0.726701
|
World Lost! #6
Saturday, August 8, 2020
The Holy Spirit afforded Moses the ability to look at the nation Israel millennia into the future: “Of the Rock that begat thee thou art unmindful, and hast forgotten God that formed thee” (Deuteronomy 32:18). Circa 750 years before Christ, halfway between Moses and Calvary, we observe the Jews’ divided kingdom—Israel up north, Judah down south. “For Israel hath forgotten his Maker, and buildeth temples; and Judah hath multiplied fenced cities: but I will send a fire upon his cities, and it shall devour the palaces thereof” (Hosea 8:14).
Israel’s land abounded with temples, places of worship. She appeared religious. Yet, the fact of the matter was they had taken their eyes off the LORD God. Outwardly, she looked alive. Internally and spiritually, however, she had already perished. As for Judah, that kingdom relied on military might instead of the LORD—seemingly strong, it was really weak.
Fast-forward to Christ’s earthly ministry, Matthew chapter 21: “[18] Now in the morning as he [Jesus] returned into the city [Jerusalem], he hungered. [19] And when he saw a fig tree in the way, he came to it, and found nothing thereon, but leaves only, and said unto it, Let no fruit grow on thee henceforward for ever. And presently the fig tree withered away. [20] And when the disciples saw it, they marvelled, saying, How soon is the fig tree withered away!” Again, “religious” Israel was promising on the outside, but barren on the inside….
Published by
Christian ambassador (Shawn Brasseaux)
Leave a Reply
You are commenting using your account. Log Out / Change )
Twitter picture
Facebook photo
Connecting to %s
|
__label__1
| 0.531263
|
Progress Does Not Mean Improvement
Before my mother got ill, the word progress had positive connotations with me. When I get my children’s progress report from school, its to show me how far they have come or where they need to go. When my son has progressed in his soccer skills, it refers to him getting better. Progress or progression in Alzheimer’s and FTD do not provide comfort to the patient or those around them. It has almost the opposite effect.
My Moms disease has progressed slowly and intermittently over the years.It was so slow in the beginning, that we did not even realize she wasn’t well. Since January, we have seen a steady progression in my Mom and the disease. Words are harder to find, she has had a few (far between) tolieting accidents, her personal hygiene is starting to wane. I try not to look at it as a day by day, but rather week to week. By doing so, I can judge a greater amount of time to see if there has been a difference. We keep hoping for a plateau. A place for my Mom to sit for a while, before more things go. In six months, we have not had one plateau. To say it’s disappointing would be an understatement.
Alzheimer’s is Like an Ikea Manual
You know when you get a new piece of furniture and you have to put it together? Many brands give you detailed written instructions. You follow each step, refer back to photos and written word until eventually your furniture is built! That is not what happens when you get a piece of furniture at Ikea. There is a manual included, but its like playing Pictionary. Black line drawn pictures for each part, with arrows telling you which way to go. You have to figure out through trial an error that its the short plastic screw that goes in, not the longer metal screw. It usually takes longer than expected to put a simple piece of furniture together. While doing so, there is plenty of frustration to go around. That sums up Alzheimer’s.
Many days I feel like I am playing Pictionary or Charades with my Mom. She is searching for words and I am calling out (often in my head), “blanket, bed, … ” to fill in the blank. There is no manual that tells me what steps to take next, which “screw” is the right one. Sometimes full pages of the “manual” are missing. We have to guess and guess and through trial and error still have a 50/50 shot that we get it right. Each time there is something to put together with my Mom it’s a different “manual.” You never know what you are going to get with Mom and you need manuals or guidance through out the day. So for the person “building” the furniture it is frustrating, for the person assisting with the build it’s devastating to never get it put together the way it once was.
As much as I search for answers to the daily and ever changing questions I have with my Mom, I can’t find them. I realize that it is in part due to the fact that there is not one answer. An answer that would fit today, may not next week or may not even fit the same from morning to night. For now, I will keep searching for answers and hope to be able to put it together.
|
__label__1
| 0.995172
|
Manychat Com Status
Manychat Com Status
ManyChat offers advanced chat marketing features, including automated bots based on keywords. A bot can follow up with someone who comments on a blog post. If they leave a comment, you can automatically capture their email address. Another tool is the Messenger Code tool, which creates scannable graphics from web pages. These tools can be used to maximize the ManyChat bot and integrate it into your other Facebook marketing efforts.
For businesses, ManyChat provides a number of tools for omnichannel chatbots. Its automation features include the ability to create welcome messages and provide options for moving forward. It also has a number of tools that allow you to connect with freelance writers and send them specific projects and rates. A few of these tools are described below. You can use these tools to build a powerful omnichannel chatbot that can enhance your customer experience across all channels.
ManyChat offers many tools, including automated welcome messages and options to move forward. You can also automate your response based on keywords and use templates to set your responses based on those keywords. You can then customize the templates and set up an automated response. Once you have created your account, you are ready to get started with your chatbot and start making money! Automated chatbots can do so much more for your business.
Before creating a chatbot, you must first verify the page’s authenticity on Facebook and the functionality of Messenger. When a page has a chatbot, it can ask the user to input their personal information, and answer all the questions. A bot should be able recognize the user and provide personalized services. When building a chatbot, voice and speech are important factors. It should sound and look like a real person and not sound like a robot.
Chatbots are an important part of your business. Creating a chatbot is a great way to increase your customer engagement and increase sales. ManyChat’s conditional features can be used to ensure that customers don’t get spammed. You can create a chatbot that helps you reach your target audience, and boosts your business’ bottom line by having a clear and concise purpose.
Chatbots should be used as an extension of your product. Using it as an extension of your product will ensure that your customers feel that your customers trust you and are able to engage with it easily. You can also create your own chatbot using the platform’s chatbot creator’s software. If you’re a small business, you may want to consider building a bot for your website. This will allow you build a chatbot for your website.
The ManyChat service offers a number of chatbot features. You can use it to track orders and explore more shopping catalogues. There are also several integrations with other systems. For example, it can automatically connect to ActiveCampaign. With its easy-to-use interface, you can easily manage your chatbot. You can also add tags to your users. It is easier to segment users by adding custom fields to manyChat.
If you’re a small business, ManyChat has an advanced plan that combines all the features of email and SMS. It has more than one million users and helps businesses grow. ManyChat was founded in San Francisco in 2015. It has raised $18M in funding. It is a popular choice for online businesses. If you want to test a chatbot for your business, you can try it for free. It’s completely free.
|
__label__1
| 0.991287
|
Surface/vertex error with B3d loader
Archives Forums/Blitz3D Bug Reports/Surface/vertex error with B3d loader
GrumpyOldMan(Posted 2005) [#1]
When a mesh is loaded with either LoadMesh or LoadAnimMesh there seemes to be random reassignment of vertex numbers/positions.
Below is a modified version of Peter Scheutz's B3d to XML to B3d program that shows what's recorded within the B3d file doesn't correspond to what's loaded.
jfk EO-11110(Posted 2005) [#2]
This may have something to do with the fact that DX is assigning the Surfaces in random order. I even think the vertex assigning is correct, but you are investigating the wrong surfaces?
You can identify the surfaces by the texturepaths they use, check out the SaveB3D example in the archives.
Beaker(Posted 2005) [#3]
Please try and use the codebox tags for long code snippets.
GrumpyOldMan(Posted 2005) [#4]
I'm using the test on a single surface mesh so there's no problem with getting the surfaces mixed up. If you run the test on any mesh you'll find that the xyz values stored in the .b3d are not what's listed when you examine the surface. It seems to transpose values for two adjacent vertices at irregular intervals. This can be extremely frustrating if you are trying to use mesh transformation/animation or vertex manipulation and the wrong bits are affected.
Here's a sample from a previous vertex_debug.txt I did. It's from the second part that shows the vertices assigned to a bone (first identifier) and the .b3d stored values (first three values) and the surface values (last three values):-
114 -0.509136 0.566088 -0.037949
-0.509136 0.566088 -0.037949
115 -0.475962 0.512421 0.052254
-0.755178 0.49754 0.029134
122 -0.509131 0.446608 -0.037958
-0.509131 0.446608 -0.037958
123 -0.470354 0.5 -0.086906
-0.767302 0.497315 -0.047245
Mea culpa. I stand rightfully admonished and will now always use the codebox tags.
jfk EO-11110(Posted 2005) [#5]
Ok, I see. Sorry, I have no idea why this happens. Maybe Mr. Sibly knows what's going on. you may also try to build the mesh from scatch with vertex data from your perosnal file format. (tho I am not sure if you can do everything you want when bones are involved).
GrumpyOldMan(Posted 2005) [#6]
Hi jfk
Thanks for the reply. Since I was going to be using the bones only from b3d's for matrix transformations of meshes, it's no great loss. Only it would have been handy to be able to rely on the b3d loader to load a mesh as recorded instead of coming up with my own mesh format and loader.
|
__label__1
| 0.966197
|
How to look a bit older without being too clingy
Aussiedoodle straight hair is a trend among some women, and some women are actually looking at their hair in the mirror every day, in order to get a little more youthful.
But what does aussiefoodle hair really look like?
And what does it really mean to be “aussiedoomed”?
So if you’re new to the topic of hairstyles and the meaning of the word, here’s what we’ve found to be the most interesting:Aussiedole hairstyles can range from simple straight bangs to messy and messy curly.
We’ve also seen some women’s hairstyles get straightened, but only to make their hair look less straight.
So what is aussie-doodle?
Aussie hair is usually the result of an extreme hair transplant.
This is where the hair from a particular person is used to grow new hair.
If the donor hair is too short, the transplant will result in a straight hair.
The donor hair will be shorter than the original.
The result is a hair with a very slight curl.
But why does this matter?
Because straight hair tends to be more naturally straight than curly hair.
So if you have straight hair and curly hair, you’re going to end up with a straight and a very short hair.
This results in a hair that’s more difficult to control and manage.
And it’s not just curly hair that is affected by aussies hair transplant: straight hair can also be frizzy, wavy or even wavy and curly.
Aussies straight hair means you look more like a certain person.
In the eyes of many people, you look like a specific person, which is very attractive.
So aussi-doodle hair can make you look younger, younger, and younger.
So if the hair transplant has resulted in a short straight hair in your scalp, you’ll get a lot more aussivedoodle straight-hairs than you would if the transplant was done on a longer hair.
But aussiopoietic surgery doesn’t work on hair transplants.
Aussiopolys are surgery that involves the removal of the hair of an adult who’s already had a full-term pregnancy.
But in the case of a hair transplant, the hair is removed from the adult’s scalp.
This means that the transplant is not permanent, so it won’t affect your hair for the rest of your life.
So there is a time and a place for Aussies transplant, and that’s when it’s most effective for a woman to have.
But, if you want to look younger and younger, you have to have some sort of surgery.
You have to get your hair transplanted, which means you’ll have to wear the transplanted hair for a period of time.
And when you’re done with that, the transplants hair is gone, so you’re left with a bald head.
Ausiopoetics, however, can be used to make a man’s hair longer than it is.
So, in the words of Dr. Steve Jones, the doctor who pioneered this procedure, you can make a patient’s hair look longer than his scalp.
But how long does a hair transplant last?
A hair transplant is typically the result that lasts for five to 10 years.
It can last for anywhere from five to eight years.
What are the benefits of Aussiefoodle hair transplans?
If you have a normal scalp, then you can expect to be looking at your hair as it’s growing naturally.
If you have AussiDoodle, then the transplant doesn’t affect the growth of the scalp, but the transplant is not as powerful.
So it’ll be much more of a struggle to get the hair transplanting to work.
It doesn’t matter if your hair transplant comes from someone else, you don’t have to be a celebrity.
There are lots of people who have Aussie-dosed hair and there are people who’ve transplanted their own hair to people in the world who aren’t celebrities.
So Aussie transplants are a fantastic way for people to show their support for other people who are a bit like themselves.
|
__label__1
| 0.519463
|
Ray Tensing Murder Trial Hearing WATCH LIVE STREAM | Law News
Skip to main content
$promoSlice() doesn't exist!
WATCH: Hearing for Ray Tensing Murder Case Re-Trial
Ray Tensinga former University of Cincinnati police officer, is facing a second trial for the death of Sam DuBose, a black motorist Tensing shot during a traffic stop on July 19, 2015. Tensing’s first trial ended in a hung jury. Before the second trial begins, attorneys for both sides are arguing at a hearing regarding the admissibility of evidence, including a Confederate flag t-shirt that Tensing wore under his uniform the day of the shooting. Watch the hearing live in the player above.
The defense believes that the shirt would be prejudicial due to its racial connotations, and would do more to play on jurors’ emotions than prove any facts in the case.
Tensing’s attorney is also expected to challenge the qualifications of the prosecution’s video expert during the hearing.
In the past, Tensing has argued that he feared for his life when he shot DuBose, claiming that the driver dragged him with his car. The jury in the first trial deliberated for 25 hours but could not reach a decision. Tensing is charged with murder and voluntary manslaughter.
Have a tip we should know? [email protected]
Filed Under:
Follow Law&Crime:
|
__label__1
| 0.930823
|
The Benefits of Living in a Smaller Property
Posted on:April 25, 2022
Living in a smaller property such as Park Homes for Sale in Gloucestershire has its benefits. It can make you live in a neater house, because you’ll have to cut down on the amount of stuff you own. Also, living in a smaller property means that you won’t have as many bills, since you’ll be paying less to heat and light it, for example. Those are definitely advantages that can’t be overlooked! Here are some other advantages of living in a smaller property.
Image credit
Saving money on energy. Because small houses are energy efficient, smaller homeowners save money on their utility bills. They don’t have to store as much as they would in a larger property. They also tend to have less junk and clutter, which means they’ll actually have more space. Consequently, smaller homes will also have a lower environmental footprint. For more information on the savings of Park Homes for Sale in Gloucestershire, go to Park Home Life.
Living in a smaller property means having more space to do the things you love. It’s important to be able to move around comfortably and have a great view of the neighbourhood. Even if it’s a small space, a small home can still have amenities like a garden and garage. Smaller properties also mean that you’ll get more out of it.
Image credit
A small home is easier to maintain. You’ll be able to clean it more easily. You’ll be able to decorate it with your own personal style on a smaller budget. Additionally, you’ll be able to spend more time with your family instead of putting everything back into the house. In addition to being more comfortable and having fewer rooms to clean, living in a smaller house is also more environmentally friendly.
|
__label__1
| 0.993507
|
Month: May 2015
How do marine renewable devices affect marine life?
by Roan du Feu, PhD student, Science and Solutions for a Changing Planet
The marine renewable energy sector is poised and ready, waiting to harness the power of tides and waves with underwater tidal turbines and floating wave energy converters. A shift to renewable energy sources is essential to reducing global carbon emissions, but what are the consequences of these new technologies? Are we prepared for the effects of filling our already fragile oceans with rows of large, moving structures? Will we cause irreparable damage? Or might there even be some positive effects?
These are all questions relevant to my thesis and so, for two weeks, I attended a course on Marine Renewables and the Environment held at SAMS (the Scottish Association of Marine Science).
|
__label__1
| 0.999288
|
2 The Danish Mortgage Market
Being one of the oldest and most stable bond markets in the world, the Danish Bond market has it’s root all the way back to 1797 where the first mortgage bank Kreditkassen for Husejere i Kjøbenhavn was established to help rebuild Copenhagen after the devastating fire of 1795 where a quarter of the city was lost to the fire.
The objective of stabilibty can also be seen in the resistance of the Danish Mortgage Market to economic crises, as the Danish economy has gone through several crises the past 50 years.
• The two oil crises of the 1970’s
• The 1986 austerity package and the 1987 tax reform
• The Dot-com bubble in 2000
• The financial crises
Arguable each crises has had an effect on the mortgage system differently and have even caused substitutional losses to the mortgage banks. However the losses have never affected the investors, as not one Danish Mortgage bondholder has lost the investment or even part of it. Moreover, the market stayed active and liquid under the financial crisis as evidenced by (Dick-Nielsen, Feldhütter, and Lando 2012; Gundersen, Hesselberg, and Hove 2011), where both find that the Danish Mortgage Bonds were as liqui as the Danish Government bonds during years from 2008 to 2009.
2.1 Types of mortgage bonds
The Danish mortgage market mainly consists of the following types of mortgage bonds
• ARMs - Adjustable Rate Mortgage Securities. which are subject to refinancing until the longer-term underlying loan has matured. The maturities match the fixed-rate period of the underlying loan, and are mainly 1 to 5 yers and the bond type is bullet
• Floating-rate note - Variable-rate annuities with redemptions matching the underlying loans. The maturites mainly range from 1 to 5 years.
• Capped floater - Variable-rate annuities with redemptions not matching the underlying loans. The maturites are mainly from 5 to 30 years
• Callable bonds - Fixed rate callable annuities, where payments and redemptions match the underlying loan. The maturities are mainly 15, 20 or 30 years.
All 4 types of mortgage bonds have underlying loans where maturires of up to 30 years are available. Furthermore, most loans can be offered with an interest only(IO) period up to 30 years. If the IO option is chosen, the loan must be repaid as an bullet bond at maturity, otherwise if a IO period of 10 years is chosen, the loan must be repaid as an annuity profile for the remaining lifetime of the loan i.e. 20 years. In recent years the amount of loans with interest only option has declined and as of December 2021, interest only loans accounts for 43.5 %1 of the loans to Danish house-holds.
2.2 The Danish mortgage model
The Danish mortgage model is based upon a stable and transparent system, with several advantages and unique features. Since mortgage banks does not function as commercial banks, and only able to fund loans through the sale of bonds which limits the risk of the mortgage banks Hence, the mortgage bank protects the investor from borrower defaulting. The mortgage bank secures the issued bond by using the cover pool which consist of collateral in terms of the claims against the borrows as well as additional securities posed by the mortgage bank to protect the investor from losses. These securities constitute what is known as overcollateralization and should be of very high credit quality.
2.3 Balance principle
The Balance principle entails that for every loan made by the mortgage bank, a new bond is issued with matching cash-flow properties. This eliminates mismatch in cash-flows and refinancing risk for the mortgage bank, which also secures payments to the bondholder. In the Danish mortgage system the mortgage bank functions as an intermediary between the investor and the borrower. Mortgage banks funds loans on a current basis, meaning that hte bond must be sold before the loan can be given. This also entails that the market price of the bond determines the loan rate. THe loan is therefore equal to the investment, which passes through the mortgage bank. Repayment and interest from the borrower to investor also passed through them mortgage bank, however the mortgage bank changes the borrower a margin though the lifetime of the loan, which is a percentage of the debt outstanding.
Since mortgage banks is only an intermediary it is not affected by changes in the floating rate, as it passes repayments and interest through to the investor. The drawback for the mortgage bank is that it endures the credit risk in the event of a default of the borrower, as it still has to make repayment and interest to the bond holder. This however protects the investor as the credit risk is removed, but is also a great incentive for the mortgage bank to put an emphasis on the due diligence process when issuing loans and adds to the stability of the system. Part of the due diligence is not only the valuing the property when making a credit assessment of a potential borrower, but also assessing the borrower’s current economic situation including income and wealth based on legislation that dictates eligibility for granting and funding loans.
2.4 Delivery and prepayment
A central unique feature of the Danish mortgage model is the delivery option which means that the borrower always has the possibility of buying the underlying bond in the market, and delivering it back to the mortgage bank, which then cancels the loan. This is unique way for the borrower to reduce the notional amount of the loan if interest rate rises, and the related bond price falls. It is also a hedging effect on the expected drop in house prices that follows increasing interest rates as the two effect offset each other. This has no effect on the investor in terms of payments made from the investors to the bondholders.
Callables bonds also have a prepayment option( embedded call-option). The prepayment option gives the borrower the opportunity to repay the loan at pari (100) at every quarter throughout the lifetime of the loan.
Capped floaters have a similar prepayment option, however the prices depends on the contract is typically 105. This is favorable when the current available coupon rate is below the coupon rate on the mortgage.
The prepayment on Danish callables and capped floaters are more difficult to price than corresponding bond without the prepayment option and come with an additional option and come with an additional prepayment risk for the investor, this is however compensated with a higher interest rate.
The prepayment risk arises from the option to prepay the loan at pari, which exposes the investor to the risk of not being able to reinvest at the same conditions. The rational scenarios for prepayment are depicted in figure ??
Pricing curve of Callabalbe Bonds and Non-callable bonds.
(#fig:important dates)Pricing curve of Callabalbe Bonds and Non-callable bonds.
When prices are close to par the price of the callable bond is lower than the price of a non-callable bond, i.e. government bond, as the chance of prepayment increases. However the borrowers are not always rational, which can create opportunities for the active investor, but is also a source of risk for a buy-and-hold strategy.
2.5 Callable annuity bonds
Callable annuity bonds are unique to the Danish covered bond market. Traditionally, callable annuity bonds were the only type of bonds issued in the Danish covered bond market but the introduction of new products has expanded market diversity. Originally, this type of bond had two payment dates per year but four has been the norm since 1985. Standard payment dates are 1 January, 1 April, 1 July and 1 October. Maturities are primarily 10, 15, 20 or 30 years. Callable annuity bonds are fixed rate bonds with an embedded call option. The embedded call option enables borrowers to prepay their loan at par at each payment date during the duration of the loan.
Traditionally, all callable loans were issued as annuity loans (level-pay loans). Annuity loans amortise with equal payments consisting of principal and interest but the amount of principal repaid increases over time, while the amount of interest decreases. In 2003, deregulation enabled mortgage banks to offer borrowers interest-only payments for up to 10 years. Callable annuity loans with an interest-only option are funded in separate callable bond series (interest-only hybrids).
Borrowers’ interest payments and redemptions made on the payment dates are distributed to investors in accordance with the percentage of bonds drawn so that any investor’s holding in a given bond series corresponds to the overall percentage of bonds drawn in that series. The amount is rounded to the nearest øre (DKK0.01) for bonds denominated in Danish kroner and euro cents for bonds denominated in euro. The amounts of bonds drawn are published on the publication date.
There is no direct link between the borrower and the investor in the sense that the investor does not buy a bond in the name of a specific person or property. The pool of borrowers in a bond series may consist of both private and corporate borrowers. The repayments at one payment date are the sum of the redemptions from all borrowers in the pool. Every month the mortgage banks publish the borrower distribution of each bond series to enable investors to predict prepayment behaviour.
Callable bond series are open for issuance for a period of three years2, e.g. between 1 September 2014 and 31 August 2017 all 30-year loans were financed through the issuance of bonds maturing in 2047 and all 20-year loans by bonds maturing in 2037. When the bond series with maturity 2037 and 2047 closed for issuance as of 31 August 2017, new callable fixed rate loans are issued in new bond series with maturity 2040 and 2050. On account of this opening period and the possibility of taking a loan with a shorter maturity than the bond’s maturity, the actual cash flow on a bond is not equivalent to the theoretical cash flow of a callable bond. Hence, the calculation of key figures on bonds requires information about the actual cash flow. After each payment date, the mortgage banks supply these figures to the OMX Nordic Exchange.
Mortgage banks have agreed not to offer callable loans based on bonds priced above par, referred to as the par rule, to avoid arbitrage from borrowers simultaneously disbursing a loan at a price above par and prepaying the loan at par. Note, however, that while a loan offer cannot be made to borrowers in a bond series trading above par, the actual disbursement and subsequent tap can happen in bond series trading above par at the time the loan is granted as loan offers can be outstanding for up to six months. If a borrower with a loan size above DKK 3M obtains a loan in a bond series trading above 100 the borrower cannot prepay for the following 12 months. The opening period of a bond series may therefore be shortened if bond prices exceed par but the bond series will be reopened for issuance if the price falls below par again.
Mortgage banks generally only offer loans in series trading fairly close to but below par due to the pull-to-par effect and risk of a sudden fall in interest rates. If a loan is offered in bonds trading far below par the pull-to-par effect will over time imply that the borrower could become technically insolvent as the LTV would mechanically increase. The same would happen if interest rates were to suddenly fall massively – as the bond would effectively have a 10 to 15 year duration LTV would increase requiring the mortgage bank to fund supplementary collateral. If the bond trades close to par even markedly lower interest rates would not change the LTV by much due to the negative convexity around these price levels.
The traditional positively convex relationship between the level of interest rates and the prices of traditional bonds is not directly applicable to callable bonds. The reason is that a callable bond can be considered as a portfolio of a non-callable bond and a sold option to repay the bond at par. As interest rates decline and the price of the bond rises above par, the value of the option will rise, see figure ??
Compared with a non-callable bond, the price is kept down when interest rates decline, as debtors are likely to start repaying the bond at par. When a bond becomes extremely exposed to prepayments, the price will fall when interest rates fall. Conversely, these bonds may offer a defensive investment alternative for investors who expect increasing interest rates.
2.6 Prepayment
Borrowers raising a callable mortgage loan are entitled to prepay the mortgage at par prior to maturity. A borrower’s right to prepay is embedded in one or two prepayment options
• Callable loans have an embedded call option and a delivery option.
• Non-callable loans have an embedded delivery option only.
To comply with the specific balance principle described in section 2.3, the borrower’s call option must be embedded in issued covered bonds in order to achieve a perfect hedge, i.e. the mortgage banks do not suffer a loss when call options are exercised. The delivery option is embedded in almost all loans originated by Danish mortgage banks. It should be stressed that a loan does not necessarily have to be terminated or prepaid when a property changes hands. Accordingly, when a property is sold, the mortgage bank decides whether the new owner can take over the loan.
If a borrower wants to exercise the call option and prepay a loan at par, he may choose between immediate prepayment and prepayment on the payment date. The former is the most common choice. Borrowers must give two months’ notice before exercising the call option, i.e. notification dates are 31 January, 30 April, 31 July and 31 October.
About 40 days prior to the payment date, accurate information on the prepayment volumes for the individual bond series is available on the publication date. Extraordinary prepayments are distributed among investors according to the same principle of drawing as described above for ordinary repayments (see Chapter 5). The bond trades ex-principal (exprepayment) two days before the term date31
Immediate prepayment means that the remaining debt and interest payments are payable to the mortgage bank within three days, i.e. prior to the payment date. However, as investors are still entitled to their coupon payments, the borrower still has to pay the coupon until the payment date (1 January, 1 April, 1 July and 1 October), which, in principle, is the first date on which the loan may be prepaid.
Thus, the borrower prepays the remaining principal plus the coupon payment for the period until the payment date. The borrower is compensated for making the funds available to the mortgage bank until the payment date (see chart below). This compensation is normally calculated at a rate close to the current money-market rate.
Prepayment on the payment date means that the borrower does not have to prepay the remaining principal and the coupon due until the payment date.
When a borrower prepays a loan, it usually raises a new one. This involves two separate transactions and the borrower is therefore free to raise a mortgage loan with a different mortgage bank than the one with which the repaid loan was raised.
When a borrower exercises the delivery option, the underlying bonds are purchased at market price. By delivering the bonds to the mortgage bank, the loan is – fully or partially – redeemed. The borrower runs the hypothetical risk of not being able to buy the bond due to lock-in effects and the mortgage banks suffer no loss when the option is exercised.
Borrowers will exercise the delivery option only if the bond price is below par and will be charged a trading fee typically of 0.10-0.30% depending on the loan size.
Observed prepayment rates are indicated in the chart below and include both delivery and call option prepayments. As can be seen, observed prepayments are closely correlated to a decline in long-term interest rates, suggesting that remortgaging at a lower interest rate is the main reason for prepayment.
Pricing curve of Callabalbe Bonds and Non-callable bonds.
Figure 2.1: Pricing curve of Callabalbe Bonds and Non-callable bonds.
2.6.1 Calculating prepayment gains
Most Danish mortgage loans are prepaid in connection with remortgaging (debt management) or in connection with the sale of a house (though prepayment is not compulsory, as the loan may be taken over by the new owner).
The advisory services provided by banks and mortgage banks focus on the gain on the first year’s net payments and on the net present value of the old loan and the new loan alternative.
Today, borrowers focus primarily on liquidity savings in the form of lower net payments and their required gains are therefore measured mainly in terms of the difference between the first year’s net payments on the existing loan and the new loan. In some cases, the first year’s net payments are reduced but the gain measured in terms of the net present value of future payments is negative. This would typically be the case if the borrower chooses to raise a loan with a longer term to maturity than the old loan. Under such circumstances, some borrowers will want to refinance, while others prefer to wait until the net present value gain is positive and above a threshold level.
The second parameter in the advisory service is the difference in net present values, also called the prepayment gain
The calculation of the prepayment gain is very sensitive to the yield curve applied. In practice, a flat yield curve corresponding to the after-tax yield on the refinancing alternative is often applied. The prepayment gain can be calculated using the following formula.
\[ \text { Prepayment gain }=\frac{\text { NPV }(\text { old loan })-(\text { rem. debt }+\text { costs }) \cdot \text { Disc }}{N P V(\text { old loan })} \] NPV (old loan) is the net present value of the old loan, corresponding to the remaining after-tax payments discounted at the after-tax yield of the new refinancing alternative. The rem. debt is the remaining debt to be refinanced and costs are the refinancing costs. Disc is the discounting factor from the payment date to the actual date on which the borrower decides to prepay the loan (no later than the notification date).
The borrower will most often be advised to refinance the mortgage based on a financial gain calculated in percent (as shown above) but also in absolute value.
2.6.2 Different types of remortgaging strategies
Borrowers have gradually become more conscious of managing their debt and increasingly use different remortgaging strategies to optimise their home financing.
Their choice of remortgaging strategy is heavily dependent on interest rate movements since the existing loan was raised and, in certain cases, the borrower’s expectations with regard to future changes in interest rates. Below we set out a brief description of the most commonly used remortgaging strategies.
Following a substantial decline in interest rates, borrowers will benefit from remortgaging an existing loan to a new loan with a lower nominal rate of interest, as described above. The borrower will receive a gain in the form of lower future net payments and thus lower first-year net payments due to the lower interest rate. However, this type of remortgaging typically results in an increase in outstanding debt, depending on the price of the bonds underlying the new loan.
Following substantial increases in long-term interest rates, the borrower is able to reduce the outstanding debt by redeeming the old loan at a low market price and refinancing it through new bonds at a higher coupon than that of the original loan. However, this type of remortgaging leads to rising future payments because of the higher interest payments. Such remortgaging is therefore profitable only if interest rates decline again within a short time period. Borrowers initially achieve a reduction in their outstanding debt at the expense of higher payments, which they hope to be able to reduce by remortgaging to a lower coupon later.
The introduction of interest-reset loans (see Chapter 5) formed the basis of a new type of remortgaging strategy. In periods of rising long-term interest rates and a substantial steepening of the yield curve and in periods of plunging short-term interest rates, borrowers holding a loan funded by long-term fixed rate bonds may remortgage their loans by redeeming the loan and refinancing it by raising a loan based on short-term bonds. The gain achieved from adopting this strategy is a reduction in the outstanding debt and lower future mortgage payments, assuming that future short-term refinancing rates remain low. In the opposite case, where long-term interest rates have plummeted and short-term interest rates are higher than long-term interest rates, the borrower is able to reduce his mortgage payments by remortgaging from an interest-reset loan based on short-term bonds to a fixed interest rate loan based on long-term bonds.
Following the introduction of interest-reset loans, borrowers have greater opportunities for achieving future remortgaging gains because redemption of the existing loan and disbursement of the new loan may take place at interest rates across the yield curve.
2.6.3 Remortgage gain depends on several factors
The remortgaging gain generally depends on several debtor-specific factors. Hence, it is of significance whether the borrower is a private individual or a corporate borrower because the tax deduction rate for interest paid by the borrower varies. However, in recent years, the tax deduction rate for private borrowers has been gradually.
In ‘The Whitsun Package,’ which was part of the 1998 tax reform, the tax deduction rate for private individuals was reduced from an average of 46% to 33% and in the most recent tax reform, ‘Forårspakken 2.0’ from February 2009, the tax deduction rate was reduced yet again from 33% to 25% over a transitional period from 2012 to 2019. The deductible rate for businesses has also been reduced in recent years and stands at 22% today, compared with 34% in 1998.
Moreover, the size of the remaining principal typically determines the remortgaging gain. If the remaining principal is small, the refinancing costs in the form of a fixed fee weigh more. The gain is therefore relatively smaller than for a large remaining principal.
Finally, the remortgaging gain may depend on the term to maturity. Hence, the achieved gain is typically greater when refinancing a 30-year loan than when financing a shorter -term loan.
In recent years, greater attention in the media and campaigns launched by mortgage banks have resulted in borrowers responding more quickly to the opportunities for a remortgaging gain.
Advisory services have also become more sophisticated and borrowers are able to have their refinancing opportunities monitored, meaning they are contacted when the remortgaging gain exceeds a pre-agreed level.
2.7 Estimating prepayments
Estimating prepayments is essential to the pricing of callable covered bonds — not just for the coming payment date but also for all future payment dates. Prepayments are important to investors as they affect cash flows. As a result, the duration of callable bonds is affected by changes in the estimated prepayment rates.
There are several different models for estimating prepayments, one of the most commonly used being the so-called capital gain requirement model where the parameters of the model are estimated based on historical prepayment data. This model assumes that a given debtor will refinance his loan if the obtainable remortgaging gain is greater than his debtor-specific required gain. Furthermore, the model allows for different debtor patterns by assuming that the various groups in the debtor distribution behave differently when it comes to borrowers’ inclination to refinance at various rates. Before 1 January 2016, Danske Bank also used such a model to estimate the risk of callable bonds. In the section Danske Bank’s old model for callable bonds (traditional model), we have described our old model, which in many ways is similar to other banks’ models for callable bonds.
Instead of using a traditional method/model to estimate future levels of prepayments for callable bonds, Danske Bank has chosen a new path. Our new model approach is not to estimate future prepayments based on historical prepayments data (as we did before with the traditional model), but to estimate the prepayments implied by the market. Hence, this is a new and unique method to calculate the risk of callable bonds.
2.7.1 Data for estimating prepayments
One of the most important factors affecting a borrower’s prepayment decision is the gain from refinancing as described in Chapter 7. Historical prepayment rates and debtor distributions are used in the estimation of the parameters in traditional capital gain requirement models (traditional models).
Historical prepayment rates for each series give a first impression of the remortgaging sensitivity of a bond series. Traditionally, series that have experienced significant prepayments can be characterised as ‘having lost their prepayment potential’ as the remaining borrowers have presumably been able to realise decent refinancing gains at an earlier date. However, we increasingly see so-called burned-out series continuing to experience high prepayment rates.
The debtor distribution of a bond series is a breakdown of the total underlying remaining debt. A debtor distribution table breaks down loans into five groups according to the size of the remaining debt in DKKm, the share of cash and bond loans and the share of corporate and private loans. This type of distribution makes it possible to divide borrowers into 20 debtor groups.
In traditional models, large corporate loans are generally assumed to have a higher remortgaging rate than small private loans, because these loans, due to the higher remaining principal, have a lower percentage cost when prepaying. The size of the remaining principal is important due to both its relation to fixed remortgaging costs and the psychological factor that makes a gain of DKK100,000 more tempting than a gain of DKK1,000.
Pricing curve of Callabalbe Bonds and Non-callable bonds.
Figure 2.2: Pricing curve of Callabalbe Bonds and Non-callable bonds.
Pricing curve of Callabalbe Bonds and Non-callable bonds.
Figure 2.3: Pricing curve of Callabalbe Bonds and Non-callable bonds.
Every week, the individual mortgage banks publish preliminary prepayments for each series for future, non-published payment dates. These prepayments allow for an estimation of the volume of prepayments for the next payment date (comparison with previous payment dates). They also allow for a calculation of the share of total prepayments for a given announced preliminary prepayment by using prepayment data at the same time prior to the previous payment date. The preliminary prepayment rates are used in Danske Bank’s new model (SuperFly) and in the old model (Danske Analytics).
Typically, preliminary prepayments are characterised by a strong exponential increase up to expiry of the notification period. Any expectation based on announced prepayments therefore becomes more reliable as the expiry of the notification period approaches. One may also track any differences between the institutions up to the notification date.
Pricing curve of Callabalbe Bonds and Non-callable bonds.
Figure 2.4: Pricing curve of Callabalbe Bonds and Non-callable bonds.
1. Nationalbanken Statistics - DNRUDDKI↩︎
2. The opening period can in certain circumstances be shorter or longer than three years, e.g. in connection with implementation of the new Mortgage Act in July 2007, the 2038 bond series was closed early and the opening period for the 2041 series was extended to almost four years.↩︎
|
__label__1
| 0.929703
|
id,summary,reporter,owner,description,type,status,priority,milestone,component,version,resolution,keywords,cc,blockedby,blocking 15180,Position plugin writes to $.ui whether it exists or not,Max Loeb,,"The jqueryui position plugin describes itself in this way: ""This is a standalone jQuery plugin and has no dependencies on other jQuery UI components."" While it's true that it doesn't depend on other jQuery UI components, it does seem to depend on the base jqueryui.js file being included, but only for the ""$.ui"" namespace to exist. If you don't include jqueryui then it crashes on line 318 of position.js: https://github.com/jquery/jquery-ui/blob/master/ui/position.js#L317 For people like me who want the functionality in this plugin but don't otherwise need the code in jqueryui, this can be quite frustrating. Apologies for not posting a jsfiddle, but I was unable to find a CDN that had a recent version of the standalone position.js file. ",bug,closed,minor,none,ui.position,1.12.1,worksforme,,,,
|
__label__1
| 0.996826
|
Burt Lancaster Was a Dad-Of-5 but His Alleged Sexuality Was Revealed 6 Years after the Passing
Even though Academy Award-winning actor Burt Lancaster had five children and three wives, FBI documents claimed he was bisexual. He was under investigation for it.
They say that you cannot judge a book by its cover, and that seemed to be the case with “From Here to Eternity” star Burt Lancaster and his sexual preferences.
For almost three decades, the FBI investigated Lancaster for a few reasons, including his alleged “homosexual behavior.” Here’s what they found.
Born in Manhattan in November 1913, Lancaster became interested in gymnastics at an early age and eventually joined the circus as an acrobat. Sadly, an injury cut short his career.
He joined the Army during WWII and started acting as part of the United Service Organization (USO). His debut film was 1946’s “The Killers,” and his career shot to stardom after that. Since then, Lancaster never stopped wowing audiences with his good looks and outstanding performances.
By the time Lancaster began his Hollywood career, he had already divorced once. His first wife was June Erns, and they were together between 1935 and 1946. Later that year, he married his second wife, Norma Anderson, in Yuma, Arizona.
They had five children, but after 22 years together, they divorced. According to Norma, they separated in January 1967 when he left the family home and said he would never return. The divorce was settled in 1969.
Lancaster’s third and final wife was Susan Martin. They dated for eight years before marrying in 1990. When they tied the knot, he was in his mid-70s.
The beloved actor passed away in 1994, aged 80, and despite his fame and wealth, he had to face some difficulties in life, including being investigated by the FBI.
Even though Lancaster was married three times and supposedly had affairs with some actresses, rumors about him being bisexual were everywhere. Apart from that, he was quite outspoken about his liberal political beliefs.
One of the things he spoke out against was the blacklisting and witch-hunting practices of the House Un-American Activities Committee in the 1940s. During that time, he was investigated by the US government for “affiliation with the Communist Party of America.”
The actor was also targeted in the 1960s for participating in the activities of the Civil Rights Congress. Lancaster supposedly was one of the Hollywood entertainers willing to make films with “strong social commentary.”
In the 1950s, the FBI also investigated him for alleged homosexual behavior. Then-director J. Edgar Hoover labeled Lancaster as a threat to US security due to his sexual inclinations.
These investigations discovered that the actor and his friend and fellow movie star Rock Hudson paved the way for the “open and promiscuous lifestyle” many other gays live in Hollywood nowadays.
Lancaster was supposedly a sex addict, and he apparently attended secret parties and orgies. In January 1960, for example, the police and military raided a notorious homosexual’s house and discovered that many “prominent individuals,” including Lancaster and Hudson, were part of the orgies.
Kate Buford, an author who wrote a book about Lancaster, pointed out that she could never confirm or deny the rumors about his bisexuality. Still, she focused on his thoughts about his own sexuality. She explained
“He had so many gay friends […] that he was never going to stand up and say, ‘I’m not gay,’ because that implied that being gay was being somehow lesser.”
Buford also noted that being free – as a person, artist, and in politics – was paramount to Lancaster, so he was against labels decades before it became a thing.
The fact that Lancaster was good friends with Hudson, who did little to nothing to hide his sexuality and frequently visited gay bars in Los Angeles, added fuel to the gay rumors.
Hudson contracted AIDS and went public with his diagnosis. In September 1985, one month before his passing, several celebrities, including Lancaster, were part of an AIDS fund-raiser.
During the event, Lancaster read a letter from Hudson in which he explained he was not happy about his illness, but since it was helping others, he found solace knowing that his misfortune had “some positive worth.”
The program raised over $1 million to assist the work of AIDS Project Los Angeles. Hudson’s tragic passing also shed light on the disease and helped shift the public’s views on it. Rest in peace.
Leave a Comment
|
__label__1
| 0.55908
|
The Clare Spark Blog
September 26, 2013
Cultural pluralism vs. multiculturalism
[Update: see, for this is a better antidote to the prevailing New Deal phony liberalism that goes by the name of cultural pluralism/multiculturalism.]
Abstract. Multiculturalism imitates cultural/religious pluralism, while undermining it by denying that we can understand persons of different “races” or genders, for each category is self-contained and indecipherable to other groups. Cultural pluralism should be about lots and lots of competing political parties and religions. The very fact that there is no state religion can call into question dogmatic upholders of any one belief system, religious or otherwise. Intellectual diversity can freak out the true believer, no matter how affiliated or indoctrinated.
Several Facebook friends have asked me to define my terms more carefully, because I assume too much when using academic jargon that is unfamiliar to them. Today’s topic is “cultural pluralism.”
Cultural pluralism is a confusing term because of the word “culture.” Much of this website is devoted to tracing the history of the term “culture” as a substitute for a more materialist analysis of our society and its institutions (i.e., substitute secular for materialist to distinguish me from a dialectical materialist). As currently practiced, cultural pluralism is almost synonymous with “multiculturalism,” which is adhered to by those envisioning a happy cooperating system of grouplets based on race or ethnicity. The multicultural assumption is that the race or ethnicity they name is free of internal divisions or divergent and/or incompatible economic interest. Thus it may be imagined that all “African-Americans” think alike, have the same economic and gender interests, and are “different” from other Americans, even though the (better) Founders and their 19th century admirers imagined that we would all live under the rule of law as distinct individuals endowed with inalienable rights.
A better term than cultural pluralism, not weighed down with “cultural” differences, would be intellectual diversity or “the marketplace of ideas.”
But in order for the marketplace of ideas to work, all participants need to be able to decode propaganda, whether the propaganda is transmitted through buzz words like “family” or through images that compel our allegiance or frighten us. Herbert Marcuse’s theory of repressive tolerance remains useful, but when first presented, it aroused a firestorm of opposition because Marcuse wanted to ban (most?) all but left-wing speech. Can anything be reclaimed from his theory? My view is that we lose when we allow the opposition to define the terms of the debate.
We are familiar with such tactics today, as Harry Reid and others define the Republican Party as “obstructionists” or “anarchists” or “defiant.” Reid and his ilk could define the competing ideas that motivate different political factions today (for his own party does not think as one), but he cannot do that, for he MUST smear the opposition in order to 1. present a united front of Democrats; and 2. to please the political class that supports him. It is the way things are done in Washington DC today. I could point to some polarizing Republicans as well.
These are hard times for intellectual diversity. That is why I admire Eva Moskowitz’s notion of having her charter school kids learn how to extract the message of a poem in grade school! Reading comprehension has never been more important. I could add to that the decoding of images.
Another confusing tactic use by authoritarians of either party is the accusation of “power-seeking” as an end in itself. I have been watching House of Cards on Netflix, and “Francis Underwood” talks to the viewer explaining that he is not out for money but “power.” But in a few episodes later, we learn that he has risen up from Southern “white-trash”. So his delight in “power” is all about revenge for the snobbery, bullying, and exclusion he undoubtedly experienced as a boy.
Displaced aristocrats (or those working for them) originated the notion of the organic society, or the organic nation, or “races”. For wannabe “aristocrats” today, nothing is so forbidden as reasoned differences of opinion, or as I call it intellectual diversity, including the summoning of “facts.” For once you open Pandora’s Box, there is no telling what monstrosities will fly out. Better to keep that box shut tight, lest the inquiring mind acquire the legitimacy that it occasionally enjoyed in eighteenth century England, parts of the United States, the Netherlands, and France. (On Pandora in Greek mythology see
Collage, Clare Spark, early 1990s
Collage, Clare Spark, early 1990s
Blog at
|
__label__1
| 0.988153
|
Build Rapport with your clients to increase your business exponentially
Rapport is the ability or the skill to relate to others in such a way that it creates a level of trust and understanding between the patient and the health care professional and is one of the key ingredients to increase the business. Building trust and familiarity with your patients/ clients can make them feel more comfortable and be honest when talking to you about their health. This in turn helps you pick up their shortcomings and work on them to provide them better results. Better results, in turn, increase your word-of-mouth references and help you grow your business.
Good rapport helps in creating a close and harmonious relationship with the patients which ultimately helps you know you, patients. Once you build a rapport with your patients and understand their personalities, you’ll be able to note minor details that may give you a hint of the possible health problems that your patient might face as well as help you keep the patient cooperative and in good spirits.
For many individuals, starting a conversation with a stranger is generally a stressful event. As a healthcare professional you might also come across patients who might not be able to express themselves well and might feel awkward explaining their problems. This might be evident in their body language and mannerism too. In such a scenario, as a health care professional, you should take the lead and start the conversation by asking open and simple questions. Creating rapport at the beginning of a conversation with someone who is an introvert will not only make the outcome of the conversation more positive but will also put the patient at ease and help him or her to discuss the problems. Adopting a similar approach that is more friendly to them in terms of your body language, gestures, voice tone, and speed will act as an add-on.
Effective communication is the foundation that helps a healthcare professional establish trust with his/her patients. The choice of words and sentences and the tone used to go a long way in rapport building. You can start with a getting-to-know-you phase with the patient that works much better if you can quickly ask them to narrate their problems from the beginning with relevant questions in between. Remember not to interrupt the patient and do not try to stop them in between as this is generally not liked by the patients.
Empathy is yet another way of building rapport with the patients and is the ability to understand the patient’s situation, perspective, and feelings. It allows a healthcare professional to deliver more customized and personalized patient care. Try to imagine how the patient feels and display the same in your body language and tone. Alleviate or reduce patient fears by explaining what actions you plan to pursue or in other words what treatment you are going to provide, why you are doing it or the logic behind the same along with the possible outcomes or results.
Active listening is an essential holistic healthcare tool. It is a non-intrusive way of allowing a patient shares his/her thoughts and feelings. As a thumb rule, listen to what the patient is saying patiently and repeat what you heard to the patient. Thereafter check with the patient to ensure whether your reflection is appropriate. You should portray yourself as a calm and competent healthcare professional who is in control of the situation. Avoid being judgmental as patients are vulnerable when they approach a health care professional and need to feel accepted.
When you have a good rapport with your patients, you can disagree with what they say and still relate
respectfully with them but this not going to happen overnight or in the first meeting but will take a couple of meetings. The important point to remember is to strive to create a conducive atmosphere in each meeting and acknowledge other people’s viewpoints and opinions.
Get involved!
Get Connected with Unitus Health Academy!
@peepso_user_18(Dr Vinita Sharma)
Very informative !
4 months ago
Unitus Community
|
__label__1
| 0.513681
|
Developing and refining your search
Searching does not always follow a straight line – it involves constant refinement and adjustment – especially if it’s an unfamiliar subject. Searching for a single topic can also yield a very large number of results, so it is helpful to consider if the information you want can be broken down into overlapping themes or topics.
Key terms
You may find it useful to break down your topic into key terms. For example, you might be looking for evidence on whether experiential therapies can help young people who have experienced trauma and how to use them. When searching for resources it is important to be specific. For example, if you only search for experiential therapies you might get inundated with information about all of the experiential therapies that exist. You could break this inquiry down into several smaller topics to identify your key search areas. One approach to this is to consider the Population of Interest, Outcome and Perspective (or tool) you are interested in or POP. In this case, the population of interest is young people who have experienced trauma, the outcome is the impact, and the perspective or tool is experiential therapies.
Your key search terms are likely to focus more as you progress so be prepared for them to change. Journal papers will usually provide a list of keywords used to index the article. This is particularly helpful in the early stages of a search when you are still familiarising yourself with the topic.
Narrowing or broadening your search
Now that you have identified specific key terms for your topic you can narrow or broaden your search according to how much more information you need to find. An easy way to do this is by using words like AND/OR/NOT. You might be doing this already in your searches! AND/OR/NOT are easy ways to connect and combine or exclude sets of search terms to give a result. This should result in more focused and productive results, and save you time and effort sifting through and eliminating inappropriate hits.
• AND narrows results by requiring both terms to be in the search results.
• OR broadens results by requiring either single or both terms to be in the search results.
• NOT narrows the results by searching for the first term, then excluding anything with the second term.
If you want to further broaden your search, consider using synonyms or alternative words for your key terms. Different words in research may have similar meanings. For example, some resources might use synonyms of the words you’re using i.e. for children it could be: young people, young adults, teenagers, adolescents. Reading through relevant titles and abstracts (or even using a thesaurus) should give you an idea of what these are likely to be.
To further narrow your search, you can use filters. Databases and online publications usually have a filter function allowing you to limit your search results, for example, by location, date of publication, publication type, keywords or language. This can be useful if you are looking for results from a particular country or over a particular time period.
‘Snowball’ searching
If you find a relevant resource on your topic, you can search for other papers that have cited it to gather additional resources.
Each result in your Google Scholar search has a ‘cited by’ option showing other papers that have cited the article. This is particularly useful for finding more recent sources of published evidence, and can also be a quick way to establish how credible the original source of information is. Think of this as a ‘snowball’ search where you’re building your pool of sources based on what you have already found.
Most policy papers and journal articles will also include a reference list. You can use these to identify other relevant works or papers on similar topics. Google Scholar also has a ‘Related articles’ option that provides a list of other articles related or similar to the one you found.
In addition to related articles, it can also be useful to search for the author to see if they've written anything else on the topic, or to look at the journal itself for relevant articles. Journals often publish themed issues collecting different articles covering the same subject.
Remember that although you’ve developed your search strategy and keywords at the beginning of the process, searching for evidence is an ongoing and evolving process. It’s fine if your strategy changes as your knowledge on the subject develops based on the evidence you’re encountering along the way.
|
__label__1
| 0.890701
|
The Story of Behnoode
The Story of Behnoode
//Words: José Berrocoso//
The iconic luxury men’s & women’s wear brand takes you on a magical, mystical journey across the Persian mountains on an enchanting Iranian carpet by Heidarian in his Fall/Winter Collection.
Behnood Javaherpour was born into a family involved in design and textiles in Tehran; Iran. His father was the pioneer of designing and producing camping equipment in Iran at the time. Behnood’s mother was an antique dealer who was also involved in the thriving textile world.
As a child, Behnood grew up in a household of creativity and colour – hence his passion for art and design developed very early on in his life. Drawing and painting became second nature to him and he loved his little sketchbook where he used to take everywhere with him. He spent his primary school years in Tehran and learnt about the different materials and fabrics from his dad’s trade. Behnood fell in love with the world of textiles and fabrics and started doing collage boards with different coloured materials to make garments for his sketches.
The designer always had a special eye for fashion and was very curious and observant of the outfits people wore around him. He started to develop his passion for fashion as he grew into a teenager and believed strongly that he can have a major influence in this industry. He believed that due to socio-economic situation, Iranians were limited in their choices of clothing and that they became very distanced and estranged with the world of fashion. He wanted to change that and the only way to do it was to master the industry through knowledge and experience.
Behnood moved to Italy at the age of 17 and whilst studying, he also started working with the local tailors learning the trade during his vacations. This experience was a huge learning curve for Behnood as he was able to learn the tricks of the trade first hand and gain the confidence required to create garments. He started designing and tailoring outfits and this became a full time job after he finished his high school. Behnood managed to save money and funded his further education at the Politecnico di Milano where he studied International Business and then later he went on to Instituto Marangoni to continue his passion and enthusiasm for fashion. He graduated in 2005 and by then his label Behnoode was established in Napoli. After years of successful business in Italy, Behnood has extended his brand into the Middle Eastern market where his outfits are popular amongst the young professionals. Behnood has also managed to inspire and attract the young Iranians with his unique yet simple designs and is proud to have been able to influence the fashion industry in that region. He strongly believed that one day he will bring back colour, design and style to his people and the Middle East, and today he has achieved this goal.
His latest collection pays homage to the Iranian art world. This highly artistic vibrant collection merges couture, carpets and paintings. A collaboration that fuses creative minds from different perspectives to bring you another form of art. Behnoode blends couture fabrics inspired by renowned painters Wahed Khakdan, Mohsen Ahmadvand, Mehrdad Mohebali and Ali Akbar Sadeghi to transform his jackets into art pieces.
The collection is a collaboration and a celebration of Persian textiles and fabrics. A historical heritage that infuses both glamour and luxury on a backdrop of majestic mountains. As fabrics intertwine to create intricate designs, producing carpets and clothing that honor the Persian ancestry. Fashion and culture combine to ensure our customs and tradition are able to thrive.
< Back
|
__label__1
| 0.95458
|
Skip to main content
06-06-2022 | ADA 2022 | Conference coverage | News
Women most often have psychosocial consequences of hypoglycemia
Author: Eleanor McDermid
medwireNews: Women are more likely than men to experience repercussions of serious or severe hypoglycemia that impact their wellbeing or diabetes management, a study suggests.
The findings from the BETTER registry, based in Quebec, Canada, found that women were more likely than men to experience important anxiety and persistent fatigue after an episode of severe hypoglycemia (requiring third-party assistance or use of glucagon). Approximately 40% of women reported this outcome.
These associations persisted after accounting for factors including fear of hypoglycemia and hypoglycemia confidence, reported Meryem Talbo (McGill University, Montreal, Quebec) in the late-breaking poster session at the 82nd ADA Scientific Sessions in New Orleans, Louisiana.
The study was based on the questionnaire responses of 590 women and 310 men. Women were significantly more likely than men to be using an insulin pump (49 vs 37%) and equally likely to be using intermittently scanned (52%) or real-time (32%) continuous glucose monitoring.
An identical proportion of women and men had experienced severe hypoglycemia within the past year (15%), but more women than men had experienced serious hypoglycemia (<54 mg/dL or 3.0 mmol/L without need for assistance) within the past month (84 vs 76%). They were also more likely to report symptomatic nocturnal hypoglycemia within the past month (71 vs 62%).
Women had significantly lower hypoglycemia confidence than men, more frequently had an elevated fear of hypoglycemia (61 vs 43%), and more frequently had psychosocial and/or diabetes management consequences following the most recent hypoglycemia episode, for both severe (95 vs 87%) and serious (78 vs 70%) episodes.
For both sexes, the most common effects of hypoglycemia on diabetes management were more frequent blood glucose measurements, changes in insulin doses, and consuming more carbohydrate and/or keeping a source to hand at all times. The most frequent psychosocial consequences were anxiety and fatigue, and, in the case of severe episodes, embarrassment or shame.
For serious episodes, women were significantly more likely than men to have persistent fatigue and to report consequences for their daily lives, and this persisted on multivariable analysis. In the univariable analysis, they were also more likely to have anxiety, loss of productivity, and to skip insulin injections, although this was infrequently reported overall. Men were more likely than women to have obtained a glucagon prescription after a serious episode.
“Social constructs on stress management may explain the observed gender differences and suggest taking a gender-based differential approach when addressing hypoglycemia,” conclude the researchers.
ADA Scientific Sessions; New Orleans, Louisiana: 3–7 June 2022
ADA 2022 coverage
New additions to the Adis Journal Club
|
__label__1
| 0.851394
|
Risk Reminder
1. Smart Contract Bug or Attack
Depth's smart contracts have been audited by a third-party security audit agency. However, security audits do not completely eliminate risk. Please do not use your savings as a source of liquidity providing on Depth. Otherwise it might lead to a huge loss, especially when you are the liquidity provider. Even though swapping on Depth has a relative low risk, it cannot be considered as the advice of investment.
The Depth model is based on AMM model, which is common in the DeFi world. In all AMM models, there could be a impermanent loss caused by price fluctuation. It is called impermanent loss because as long as the token's relative price goes back to its initial state (when user provided liquidity), the loss will disappear. If users withdraw the liquidity before the ratio in the pool return to the initial state, the loss will become to be a permanent one.
For example, the Channels/Filda/LendHub/Pilot/Coinwind/Venus/Alpaca/BACK liquidity pool connected to Depth may also be at risk. The reason why Depth established the lending pool is because the lending protocol can provide a better APY for stablecoins. But in the lending pool of these stablecoins, you may be at the following risks:
•Channels/Filda/LendHub/Pilot/Coinwind/Venus/Alpaca/BACK lending protocol has its own smart contract risks
•Smart contract risks of Depth's Channels/Filda/LendHub/Pilot/Coinwind/Venus/Alpaca/BACK pool
•The stablecoins in these pools have their own contract risks and price stability issues, such as the risk of USDT turning to zero, the failure of the oracle of the lending protocol, and the risk of bugs or attacks on the stablecoin contracts
As users of DeFi protocols, please do not underestimate the risks associated with liquidity providing on Depth or other DeFi protocols. Even after a long period of operation and testing, as well as continuous technological advancement, the existance of these risks cannot be denied.
4. Private Key Risk
The admin key has the highest authority managing the contracts. It could modify mining parameters( such as the weight of the mining pool, adding new stablecoin mining pools, etc). In extreme and urgent situation, the admin key may suspend the contract.
|
__label__1
| 0.79481
|
About Us
Student health 101
Ten Things Faculty Should Know about Students with Disabilities
1. The DRC website is the best starting point for information on students with disabilities.
2. Visit the Faculty Room:
3. Accommodation Plan: To receive services from the DRC, students submit medical or other appropriate documentation. DRC staff determines if the documented impairment rises to the level of disability. If so, an accommodation plan will be developed. If a student does not have an approved accommodation plan, your options are to refer them to the DRC or, as is your prerogative, to provide the accommodations.
4. Accommodating students is a shared responsibility between the student, faculty and the DRC. Based upon the fundamental principles of the ADA, the DRC endorses specific accommodations based upon the documentation submitted by the student, the student’s prior record of accommodations; the student’s expressed needs and the professional judgment of the DRC staff.
5. Most common accommodations (see FAQ's): alternative testing (typically extended time and a distraction limited environment); note taking, interpreter/captionist; and print alternatives, such as Braille, large print or electronic text.
6. The California State University Board of Trustees Policy on Disability Support and Accommodations
Section XI states: Appeals Procedures
Students denied a requested accommodation may appeal the decision through on-campus informal and formal dispute resolution processes. Each campus shall adopt and publish grievance procedures providing for appropriate due-process procedures and for prompt and equitable dispute resolution. Services authorized by the director of the program for students with disabilities must continue during the grievance process.
7. Universal Design: How can educators design instruction to maximize the learning of all students? The field of universal design can provide a starting point for developing a framework for instruction. You can apply this body of knowledge to create courses where lectures, discussions, visual aids, videos, printed materials, labs, and fieldwork are accessible to all students.
8. Accessible Technology Initiative:
1. Web Access (e-info needs to conform to specific standards)
2. Instructional Materials (available in alternate format at the same time)
3. Procurement (electronic and information technology (EIT) products and services that we buy, create, use and maintain)
10. How to address questions from other students in your class, about why a student is receiving an accommodation: Even if a disability is obvious (e.g., blindness), instructors need to keep that information confidential and can only share on a need to know basis with other staff of Cal Poly. If an instructor is questioned by students as to why a classmate is receiving "different" treatment (e.g. being allowed to test longer in class), the instructor can point out that many school issues are personal, and that Cal Poly's policy is to respect each individual's privacy.
11. When in doubt: ask. Reasonable accommodations are provided to individuals with disabilities in order to ensure they have an equal opportunity to participate in all programs and activities. Civil rights laws protect individuals from discrimination but do not require special privileges or unreasonable accommodation. Accommodations should not fundamentally alter the nature of the academic task or activity, or pose a financial hardship to the university. If you question the reasonableness of an accommodation request, please contact us so that we may collaboratively assess the situation.
Related Content
Phone: 805-756-1395
Fax: 805-756-5451
Email: [email protected]
Give Today
A group of young people looking very excited
Give Today
Strategic Plan
Get the Student Affairs Strategic Plan
Get the plan here
|
__label__1
| 0.961494
|
how does Xojo.Net.HTTPSocket manage keep-alive connections?
And how can I know if a connection is in progress or if its ready for another request?
I assume (heh) that if the server supports keep-alive then after the response as been sent back to me that the socket will stay open until I close it or some other timeout is reached. If I make additional Send calls after the connection is established and the first request is finished do they go down the same pipe that it kept open? I should call ClearRequestHeaders first though correct?
So how can I tell if the connection is ready for another request or not? Or does HTTP/1.1 support my sending as many requests as I like and it will just queue them up itself and I dont have to worry about waiting for one to finish before I start another? There is some vague references in the docs about a request already in progress type exception, but I dont see that documented in the send method for the
There is a change that the server wont support http/1.1 and Ill have to drop back to 1.0 or that connection-close will be specified in the first return. So what happens in the case of my having queued up several requests at once and then the socket is actually closed. I assume it wont save those up and fire them out one at a time then?
If there was a property to let me know that there is a request in progress that would make it fairly easy to queue up additional requests and push them out after the last one was received, after some non-fatal error was received or timeout. But I dont see that in the documentation either. Do I have to subclass the socket and add that by setting it to true when I do a send and then resetting it when the response is received?
|
__label__1
| 0.935328
|
Elevate The Style Of Your Cooking With These Tips
Kiddie party catering Sydney packages designed to celebrate the mythical and magical fantasy birthday party that you and your kids are planning to do. Many people look at cooking meals as simply a chore that has to be done. It can also be a healthier life. A good cook continues to learn, and the following information will help you learn more about cooking as well.
There is a way to save your sauce so it isn’t wasted. Mix 2 tablespoons of water with one tablespoon cornstarch in a bowl. Stir this mixture into the thin sauce and it will thicken it up. Make sure to introduce the sauce from thickening too thick.
Slicing meat into thin even strips is easier if the meat is partially frozen.This technique is particularly good for meats served in Asian dishes. However, be sure to allow the meat strips to thaw before cooking them, you want to make certain the meat strips are thawed before cooking.
You should never attempt to cook new or extravagant recipes that you enjoy. This will help you feel less stressful.
Quickly cooking vegetables makes them to retain much of their nutritional value.Vegetables that are cooked slowly can lose their taste and valuable nutrients. These speed-cooking techniques tend to preserve the health benefits of vegetables in general. Cooking better vegetables is all about cooking them for only a short amount of time possible.
Garlic is among the multitude of tasty ingredients whose flavor has a downside; it transfers to your hands and fingers. Try rubbing your hands on stainless steel sink after you work with the garlic or other potent ingredients. This will clean your hands thoroughly and keep the odor from seeping into any other foods you are going to handle.
This will help to give your dish to become more flavorful.
Always make certain to measure your oil when you are cooking. This will help you reduce how much fat in your foods while cooking. This will enable you to keep an eye on just how much oil you use.
Always select fresh garlic to get the full flavor in your dishes. A rule of thumb is that fresh garlic will have a sweet taste to it. Fresh garlic is not soft and firm to the touch.
One great cooking tips you can find is to use your own thing. You don’t always have to follow a recipe exactly. That is a creative cook!
Impress family and friends when you make a sandwich by placing the mayonnaise evenly on the entire slice of bread. An even spread will ensure that every single bite to bite.
Good cutting utensils are an excellent investment for your kitchen. Dull knives cause more cut fingers and accidents than sharper ones.
Use soft butter not melted butter for creaming sugar and butter for cookies. If you do melt the butter on accident, put it in the freezer for several minutes until it hardens, or put the dough in the refrigerator after you have mixed all the ingredients. Your dough will not spread the right amount if you use cooler dough.
A great way to cook up bits and pieces of leftover vegetables in your refrigerator is to make some fried rice. Fry the veggies and meats in a little oil, then add the rice and season with soy sauce, ginger, garlic in with it.
If you wish to remove strong food odors from your hands, take a moment to rub them against a stainless steel surface before you wash them. You can do this on the side of a sink or use a stainless steel soap bar and it will lift the odors from your hands, or even a special steel “soap” in order to remove these smells.
Those of you who enjoy cooking fish dishes should try taking DIY to the next level and do some fishing to get their raw ingredients.
When making mashed potatoes, mix the potatoes using hot, but never boiling.This alternative to the addition of cold milk will make your mashed potatoes much airier and airy texture that you desire. Nobody really wants to eat mashed potatoes!
Make sure you preheat your oven at least 300 degrees.
Make sure you use the right type of potato for your dish. Potatoes come in three classes: all-purpose, waxy or all-purpose. Russet potatoes are popular mealy potato. Waxy potatoes are good for steaming or boiling because they keep their shape is maintained. Red and white potatoes are just a few examples of the waxy type.
Here is an easy way to cut your cinnamon rolls.It can be quite a challenge to cut your unbaked cinnamon rolls. You should place a piece of thread or clean fishing line to slice wherever you want. This will lead to perfect slices perfect.
The introduction talked about how cooking enthusiasts are always looking to learn something new. Joy that comes from cooking comes not just from preparing a meal, but also from learning about various foods, and acquiring new cooking skills and techniques. Learning a good cook is also one who shares their knowledge to help others become good cooks. Cooking tips should be shared, not only learned.
|
__label__1
| 0.516386
|
path: root/hwaccess.c
Commit message (Collapse)AuthorAgeFilesLines
* Use shutdown callback mechanism to shutdown programmersDavid Hendricks2011-06-141-1/+2
* Revert MMIO space writes on shutdown as neededCarl-Daniel Hailfinger2011-05-031-0/+101
| | | | | | | | | | | | | | | | | | Reversible MMIO space writes now use rmmio_write*(). Reversible PCI MMIO space writes now use pci_rmmio_write*(). If a MMIO value needs to be queued for restore without writing it, use rmmio_val*(). MMIO space writes which are one-shot (e.g. communication with some chip) should continue to use the permanent mmio_write* variants. Corresponding to flashrom svn r1292. Signed-off-by: Carl-Daniel Hailfinger <> David tested it successfully on some NM10/ICH7 platforms which switch between SPI and LPC targets (x86 BIOS ROM vs. EC firmware ROM). Acked-by: David Hendricks <>
* Add support for building flashrom against libpayloadPatrick Georgi2010-09-301-2/+4
| | | | | | | | | | | This doesn't include changes to the frontend which must be done separately, so this won't work out of the box. This code was tested on hardware. Corresponding to flashrom svn r1184. Signed-off-by: Patrick Georgi <> Acked-by: Carl-Daniel Hailfinger <>
* Add OpenBSD supportCarl-Daniel Hailfinger2010-07-021-0/+5
| | | | | | | | | | | | | | Add a requirements section to the man page which lists the needed access permissions for each programmer. This feature needs my pciutils/libpci 8/16-bit write emulation patch at titled [PATCH] Fix pciutils non-32bit PCI write on OpenBSD Corresponding to flashrom svn r1067. Signed-off-by: Carl-Daniel Hailfinger <> Acked-by: Stuart Henderson <>
* Kill unneeded #include wherever possibleCarl-Daniel Hailfinger2010-06-211-3/+8
| | | | | | | | | | Tested on Linux, FreeBSD, NetBSD, OpenBSD, DOS. Thanks to Jonathan A. Kollasch and Idwer Vollering for testing. Corresponding to flashrom svn r1057. Signed-off-by: Carl-Daniel Hailfinger <> Acked-by: Idwer Vollering <>
* Remove unneeded #include statements completelyCarl-Daniel Hailfinger2010-05-301-0/+1
| | | | | | | | | | | | | | | Unistd.h was only used to get a definition of NULL in all files. Add our own NULL #define and remove unistd.h from flash.h stdio.h has no place in flash.h, it should be included only in files which really need it. Add #include statements in individual .c files where needed. Replace a few printf with msg_* to eliminate the need for stdio.h. Corresponding to flashrom svn r1021. Signed-off-by: Carl-Daniel Hailfinger <> Acked-by: Uwe Hermann <>
* Handle the following architectures in generic flashrom codeCarl-Daniel Hailfinger2010-05-261-0/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - x86/x86_64 (little endian) - PowerPC (big endian) - MIPS (big+little endian) No changes to programmer specific code. This means any drivers with MMIO access will _not_ suddenly start working on big endian systems, but with this patch everything is in place to fix them. Compilation should work on all architectures listed above for all drivers except nic3com and nicrealtek which require PCI Port IO which is x86-only for now. To compile without nic3com and nicrealtek, run make distclean make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no Thanks to Misha Manulis for testing early versions of this patch on PowerPC (big endian) with the satasii programmer. Thanks to Segher Boessenkool for design review and for helping out with compiler tricks and pointing out that we need eieio on PowerPC. Thanks to Vladimir Serbinenko for compile testing on MIPS (little endian) and PowerPC (big endian) and for runtime testing on MIPS (little endian). Thanks to David Daney for compile testing on MIPS (big endian). Thanks to Uwe Hermann for compile and runtime testing on x86_64. DO NOT RUN flashrom ON NON-X86 AFTER APPLYING THIS PATCH! This patch only provides the infrastructure, but does not convert any drivers, so flashrom will compile, but it won't do the right thing on non-x86 platforms. Corresponding to flashrom svn r1013. Signed-off-by: Carl-Daniel Hailfinger <> Acked-by: Misha Manulis <> Acked-by: Vladimir 'phcoder/φ-coder' Serbinenko <> Acked-by: Uwe Hermann <> Acked-by: Segher Boessenkool <>
* Convert various prints to use msg_p* and msg_g* respectivelySean Nelson2010-05-071-1/+1
| | | | | | | | | Convert programmer print messages to msg_p* convert general print messages to msg_g* a few fixes as suggested by Carl-Daniel. Corresponding to flashrom svn r997. Signed-off-by: Sean Nelson <> Acked-by: Carl-Daniel Hailfinger <>
* Fix the DOS portRudolf Marek2010-04-251-39/+0
| | | | | | | | | | | | Now the DS selector limit is set to 4GB and all mmio accesses goes through DS, the 1:1 mapping is fixed so the _DS base is taken onto account. Plus is that the hwaccess.c needs no change and memcpy etc can be used on mmaped space. Corresponding to flashrom svn r995. Signed-off-by: Rudolf Marek <> Acked-by: Carl-Daniel Hailfinger <>
* Add MS-DOS crosscompilation supportRudolf Marek2010-03-161-1/+42
| | | | | | | | | Tested, works fine. Part 1: Code changes. Corresponding to flashrom svn r944. Signed-off-by: Rudolf Marek <> Acked-by: Carl-Daniel Hailfinger <>
* Split internal.c into internal.c and hwaccess.cCarl-Daniel Hailfinger2010-02-121-0/+83
Linking in support for the internal programmer doesn't make sense if you only need hardware (ioport, memory) access. Note: This patch was created by "svn cp internal.c hwaccess.c" and then removing stuff from both files. That's why you can't apply the patch as-is before running the svn cp. Corresponding to flashrom svn r898. Signed-off-by: Carl-Daniel Hailfinger <> Acked-by: Sean Nelson <>
OpenPOWER on IntegriCloud
|
__label__1
| 0.999419
|
Frequent questions about Milanese in Rivas - Arganda
How long does it take to have Milanese delivered to my place in Rivas - Arganda?
The delivery time changes based on various factors and each store will display the exact estimated time of arrival of your Milanese. On average the delivery time for Milanese in Rivas - Arganda is 60 minutes.
What type of Milanese can I order in Rivas - Arganda?
You can have every type of Milanese Rivas - Arganda’s stores serve, just check their catalog: some have customised options, too.
What are the best rated Milanese stores in Rivas - Arganda?
Glovo works with some of the best Milanese stores in Rivas - Arganda and this is reflected in the ratings!
How much does it cost to have some Milanese delivered in Rivas - Arganda?
|
__label__1
| 0.99898
|
Asterios Polyps, Simultaneity, and Subjective Readings of Comics
Because they are bound codexes or digital texts instead of a moving picture, like a film, TV show, or video game cut scene, comics have almost unlimited rereading potential for almost unlimited meanings. For the most part, reading a comic again introduces new nuances and details ranging from the mundane (seeing the 10th Doctor in the background of a Buffy Season Eight panel) to the important (all the twins in Asterios’ room as a boy). And after reading a page, one can go back and see how it fits in with the last panel on the last page or even further back. And no two readers will have the same idea of what goes in the gutters between panels. This subjectivity increases once you add in the context and competency of individual readers. For example, most readers will know about the Orpheus myth, but many will not know about the Greek modes in the scene where Asterios, Hana, and Willy visit the experimental composer Kalvin Kohoutek. This added or lack of knowledge is part of the subjective experience of reading comics along with things, like whether this is first reading or rereading. I think that Kalvin Kohoutek’s ideas about art and music correspond nicely with the idea of the subjective experience of comics reading.
Despite Asterios’ strict adherence to duality (rhythm and melody in the case of music), Kalvin eagerly explains his new take on the Orpheus (Underground) symphony, which involves layers of music playing at the same time. This will create an effect where listeners will listen to different parts of the layers creating a unique, individual listening experience. This type of experience can also be replicated in comics. For example, the pages that show Hana going through her day can be read in a variety of ways depending on the reader. Even if you read the panels in the same order, you can get something different out of the story. For example, I just noticed that when Kalvin is talking about his symphony, he doesn’t get his own panel, but is boxed in between Willy and Asterios’ square panels. This shows how he is marginalized in the conversation even though he is the only composer in the group. There is an added layer of pathos in a rereading because Kalvin broke his leg marching in the Civil Rights movement in the 1960s. This rereading places Willy and Asterios on the same level because they both stand off to the side and make pretentious comments while this heroic artist has to pick up everything by himself. A re-reading and re-examination of the art and panel layout of a comic can reveal some hidden things about characters. Mazzuchelli’s art and colors has this effect in Asterios Polyp, which requires multiple rereadings to understand the hidden layers and theories in his comic.
Finally, Kalvin’s idea of “simultaneity” (which he applies to his music) can apply to the subjective reading of comics as well. When you open a comic (unless it’s a splash page), there are a variety of little panels crying out to be read. You know that you have to read left to right, but what panel or images catches your eye first. If the page has a lot of text or panels, do you worry about being able to process everything? One of the best comics that shows this “simultaneity” effect other than Asterios Polyp is The Dark Knight Returns by Frank Miller, which uses small TV screen panels to give a context of what is going on in this dystopian world. You have to remember what’s going on with Batman, Carrie Kelly, the Mutant gang, various supervillains, the US government etc. Reading a comic book is a great balancing act, especially if it is a large graphic novel, like Asterios Polyps or Fun Home, or a long running title, like The Walking Dead, Fables, or the 900+ issues of pre-New 52 Action Comics. However, each time you read or reread your favorite comic, you get a unique experience in a similar manner as listening to Kalvin’s multi-layered, polyphonic Orpheus symphony.
|
__label__1
| 0.605761
|
NPS releases short film on endangered Hawaiian honeycreepers
Maui News –
The National Park Service has released a new short film called “Drawing Connections: Haleakala National Park,” which sheds light on how climate change is impacting the park’s most critically endangered species, Hawaiian honeycreepers.
With only 17 species remaining, some with fewer than 500 individuals left, honeycreepers are a unique group of forest birds found only in Hawaii that once encompassed more than 50 species.
The National Park Service said in a news release that avian malaria, a disease transmitted by invasive Culex mosquitoes, is driving the extinction of forest birds in Hawaii; a single bite by an infected mosquito can kill an ‘i’iwi.
“It is becoming very clear that the changing climate patterns are now allowing disease-carrying mosquitoes to reach our native forest birds at the highest elevations that they occur,” said Chris Warren, forest bird biologist at Haleakala National Park. “This is no longer a matter of disease simply limiting the range of these birds.”
As the climate warms, mosquitoes carrying avian malaria are moving upslope into the last refugia for Hawaii’s forest birds.
“We are on the brink of losing a number of species in the next few years as a direct result of changing temperature and precipitation patterns,” Warren said. “If we cannot control avian malaria and its mosquito vector, we will lose these species, and my heart breaks to say that.”
To watch the film and learn more about climate change and forest birds, visit www.nps .gov/hale/learn/nature/saving-our-forest-birds.htm.
To learn more about climate change impacts in national parks, visit
Researchers trace evolution of diversity in Hawaiian Honeycreepers
Science Daily
An international team of scientists has determined the evolutionary family tree for one of the most strikingly diverse and endangered bird families in the world, the Hawaiian honeycreepers.
Using one of the largest DNA datasets for a group of birds and employing next-generation sequencing methods, the team which included Professor Michi Hofreiter, of the University of York, determined the types of finches from which the honeycreeper family originally evolved, and linked the timing of that rapid evolution to the formation of the four main Hawaiian Islands.
The research, which will be published in the latest edition of Current Biology on 8 November, also involved scientists from the Smithsonian Institution and Earlham College in the USA and the Max Planck Institute for Evolutionary Anthropology in Leipzig.
There were once more than 50 species of these colourful songbirds that were so diverse that historically it was unclear that they were all part of the same group.
Professor Hofreiter, of the Department of Biology at the University of York, said: “Honeycreepers probably represent the most impressive example of an adaptive radiation in vertebrates that has led to a number of beak shapes unique among birds. In our study we are, for the first time, able to resolve the relationships of the species within this group and thereby understand their evolution.”
Heather Lerner, an assistant professor of biology at Earlham College, added: “Some eat seeds, some eat fruit, some eat snails, some eat nectar. Some have the bills of parrots, others of warblers, while some are finch-like and others have straight, thin bills. So the question that we started with was how did this incredible diversity evolve over time?”
The answer is unique to the Hawaiian Islands, which are part of a conveyor belt of island formation due to volcanic activity, with new islands popping up as the conveyor belt moves northwest. Each island that forms represents a blank slate for evolution, so as one honeycreeper species moves from one island to a new island, those birds encounter new habitat and ecological niches that may cause them to adapt and branch off into distinct species. The researchers examined the evolution of the Hawaiian honeycreepers after the formation of Kauai-Niihau, Oahu, Maui-Nui and Hawaii. The largest burst of evolution into new species, called a radiation, occurred between 4 million and 2.5 million years ago, after Kauaii-Niihua Oahu formed but before the remaining two large islands existed, and resulted in the evolution of six of 10 distinct types of species.
Co-author Helen James, a research zoologist at the Smithsonian National Museum of Natural History “This radiation is one of the natural scientific treasures that the archipelago offers out in the middle of the Pacific. It was fascinating to be able to tie a biological system to geological formation and allowed us to become the first to offer a full picture of these birds’ adaptive history.”
Using genetic data from 28 bird species that seemed similar to the honeycreepers morphologically, genetically or that shared geographic proximity, the researchers determined that the various honeycreeper species evolved from Eurasian rosefinches. Unlike most other ancestral bird species that came from North America and colonized the Hawaiian Islands, the rosefinch likely came from Asia, the scientists found.
Rob Fleischer, head of Smithsonian Conservation Biology Institute’s Center for Conservation and Evolutionary Genetics said: “There is a perception that there are no species remaining that are actually native to Hawaii, but these are truly native birds that are scientifically valuable and play an important and unique ecological function. I’m thrilled that we finally had enough DNA sequence and the necessary technology to become the first to produce this accurate and reliable evolutionary tree.”
The diversity of Hawaiian honeycreepers has taken a huge hit, with more than half of the known 56 species already extinct. The researchers focused on the 18 surviving honeycreeper species but of those, six are considered critically endangered by the International Union for Conservation of Nature, four are considered endangered and five are vulnerable.
Professor Hofreiter said: “It is a tragedy that most species from this unique group of birds, one of the best examples of the power of natural selection we have on earth, are extinct or on the brink of extinction. We still have time to take actions to conserve the diversity that is left.”
The next, step in the research is to use museum specimens and subfossil bones to determine where the extinct species fit into the evolutionary family tree, or phylogeny, to see if the new lineages fit into the overall pattern found in the current study. DNA analysis for the current study used specialized protocols developed by Professor Hofreiter and colleagues at the Max Planck Institute
|
__label__1
| 0.998137
|
Step 1:
Under elements select text:
Step 2:
Browse through our library of text templates.
You can also narrow your search down by selecting from the categories below or by typing the keywords in the search bar below.
Step 3:
Once you've added the text template onto the canvas, click on it and select UNGROUP in order to edit the text in it:
* FYI: The text template cannot be edited unless it is ungrouped because it is grouped together with other shapes and elements.
Did this answer your question?
|
__label__1
| 0.994802
|
Three teenagers in court on Mountcharles arson charges
Donegal Circuit Court has heard how three teenagers set fire to the furniture in a gate lodge house in Mountcharles, south Donegal causing €60,000 in damage.
One of them, a girl who was 15 at the time, and now has a nine-months-old baby girl, Donegal Circuit Court was told.
The girl, who cannot be identified and a young man, 20-year-old Edgar Kearns, admitted arson at Gate Lodge, Mountcharles, on March 8th 2008.
Another teenage girl, also too young to be named, has already been dealt with by an earlier court.
Judge John O’Hagan said it was a “very serous” offence with a life sentence the maximum penalty.
He said the youngsters were an out-of-control anti-social group who had been drinking and there were probably other substances involved. They broke a window to gain access to what was a holiday home.
He added that the act done was absolutely deliberate.
The judge heard the youngsters piled up furniture and then set it alight. When thick black smoke emerged they fled the premises.
He said he believed that Kearns, who was 18 at the time, and the teenage mother, now 17, were remorseful for what they did and they hadn’t been in trouble with gardai since.
Kearns, of Millrace Crescent, Donegal Town, was sentenced to two years, suspended on condition that he do 50 hours community service.
Because of conditions that apply under the Children’s Act, Judge O’Hagan put the girl’s case back until Friday when he will hear from the Probation Service.
He told her she now had an opportunity to experience the demands of parenting.
Top Stories
|
__label__1
| 0.855163
|
This post is also available in: heעברית (Hebrew)
Researchers have found a way to harvest electricity from radio waves. From microwave ovens to Wi-Fi connections, the radio waves that permeate the environment are not just signals of energy consumed but are also sources of energy themselves. An international team of researchers from Penn State Department of Engineering Science and Mechanics has developed a way to harvest energy from radio waves to power wearable devices.
Current energy sources for wearable health-monitoring devices have their place in powering sensor devices, but each has its setbacks. Solar power, for example, can only harvest energy when exposed to the sun. A self-powered triboelectric device can only harvest energy when the body is in motion.
“We don’t want to replace any of these current power sources,” said one of the team leaders, Huanyu “Larry” Cheng. “We are trying to provide additional, consistent energy.”
The researchers developed a stretchable wideband dipole antenna system capable of wirelessly transmitting data that is collected from health-monitoring sensors. The system consists of two stretchable metal antennas integrated onto conductive graphene material with a metal coating. The wideband design of the system allows it to retain its frequency functions even when stretched, bent and twisted. This system is then connected to a stretchable rectifying circuit, creating a rectified antenna, or “rectenna,” capable of converting energy from electromagnetic waves into electricity. This electricity can be used to power wireless devices or to charge energy storage devices, such as batteries and supercapacitors.
This rectenna can convert radio, or electromagnetic, waves from the ambient environment into energy to power the sensing modules on the device, which track temperature, hydration and pulse oxygen level. Compared to other sources, less energy is produced, but the system can generate power continuously — a significant advantage, according to
The research was published in Materials Today Physics.
|
__label__1
| 0.999246
|
Contact a Lawyer now
Do I Really Need a Truck Accident Lawyer?
Do I Really Need A Truck Accident Lawyer
Nobody wants to get involved in an accident. But if you have ever been injured in a truck accident, then you may have to deal with a lot of things to compensate for that. So for the proper liability, investigation, insurance negotiations, you may require to call a Truck Accident Lawyer.
Statistics say that every year the accidents or dangers that are existed in the road, truck accident is the most common one among them. Truck accidents happen more often than other vehicles. And any time you can be in that type of accident. So it is so important to know your rights. In this writing, you will get to know when do you need a truck accident lawyer? So keep reading!
Do You Really Need a Truck Accident Lawyer?
If you are injured in a truck accident, then as a victim of that accident, you are allowed to pursue certain compensation. So you may require to hire a Truck Accident Lawyer who will help you with your legal rights.
If you are wondering whether you need a lawyer for an accident settlement, then you may need to know what a prominent truck accident lawyer does. A big truck accident is such a complicated and complex case.
If the case is done without a lawyer, then its results would not be gratified because it involves many regulations and parties. So below are given some specific reasons why you need a big truck accident lawyer.
1. When You Need To Gather The Evidence
Gathering and collecting evidence is very important for any kind of personal injury case. It will help to prove the damages and faults. Some pieces of evidence are really easy to access at the time of the accident. But some information is required by a legal request from a third party. And a truck accident lawyer can have more access to data and information than a normal civilian.
Evidence that your lawyer is able to manage:
Mobile Phone Records:
Using a mobile phone becomes one of the major problems for truck drivers. And using a mobile phone while driving can cause a devastating accident. Only a lawyer can request cell phone records in individual cellular companies. This is how mobile phone records can prove who is guilty of a particular accident.
Criminal Records
Most of the case the truck accident happens for irresponsible drivers. Some are not that professional and qualified, which leads to a dangerous accidents. A lawyer can help you to manage the driver’s criminal records and DMV records. Thus he helps to determine whether the driver was responsible for that accident or not.
Video Evidence
A lawyer will also help you by gathering the video footage of those incidents if there were any security cameras. And video footage evidence is a strong piece of evidence for any kind of case.
Gathering Witnesses
Sometimes it is so helpful to find someone who witnesses the incident. They will help a lot to understand a case. A big truck accident lawyer can help you to find some witnesses and determine the value of your injury.
2. When You Need to Calculate The Damage
When you have been involved in a truck accident, sometimes the damage is pretty serious, and sometimes is not. So how can you determine the damage? The truth is, there is no that type of calculation to calculate the damage. That is why you need a lawyer to do that job.
The accident settlement will determine the seriousness of your injury. And how bad your injuries are, how long will it take to recover? A big truck accident lawyer knows which is best for you. They know all the tricky business policies of insurance companies. And they can evaluate your damage and can ensure a good settlement.
And the lawyer calculates it in some several factors:
Medical Bill
When the injury is serious, the medical bill would also be huge. And most cases the damage caused by the truck accident is severe. It requires several months to recover and charge a huge amount of money in the hospital, including the visits, medical transportation, and so on.
Loss of Time
Losing work time is another big problem when you are a victim of an accident. When you are in the hospital, you do not have a way to work. As a result, loss of work time. And the loss of work time always determines how the insurance company treats the settlement for your accident.
Pain and Sufferings
Every injury has a different perspective on pain and suffering. Based on your medication and recovery time, it will help the lawyer to calculate the damage. If it is something serious like brain injury and so on, then the lawyer can claim a huge amount of settlement for you.
Premature Death
The accidents involve with the large truck can be deadly anytime. Statistics say that every 20 accidents there is 1 death case. If there is something like this, then a truck accident lawyer can claim a lifetime settlement for the individual’s family.
3. When You Need to Prove the Guilt
When you are the victim of a truck accident, it is also very important to prove the fault. No one wants to take responsibility for the incident. But it is the most crucial step to prove the guilt because the fault will determine who is going to pay and be responsible for that accident.
In most, cases over speed are the reason behind the accident. Though when the proof is quite clear, the insurance company will try to get out of paying by showing the guilt is minor. That is why you need to hire a lawyer who will defend you against the insurance company.
4. When You Need to Negotiate with The Insurance Company
A truck accident injury and damage will determine how much money or settlement you will get from the insurance company. At the beginning of the case, the insurance company will never offer their best for you. Because as like every company, they also look for their profit.
Sometimes it may be necessary to take the insurance company and the truck authority to the court to recover the damage. So negotiating with the insurance company is vital to ensure your right from the damage. So you need to hire a truck accident lawyer who knows the tricky strategies of insurance and can help you to negotiate with the insurance company.
If you ever have experienced a truck accident, then there is no need to tell you that tremendous experience. If you have not, then do not get worried. You are not alone. There are plenty of truck accident lawyers around you who are opened to help you guys.
A good truck accident lawyer can help to ensure your rights and fight to get the compensation that you deserve. And hopefully by reading this article, now you know when you need a Truck Accident Lawyer.
Chat icon
Please contact us for more information.
Contact a lawyer now
Your information is kept safe.
|
__label__1
| 0.713445
|
@article {Antiel234, author = {Antiel, Ryan M and Curlin, Farr A and Lantos, John D and Collura, Christopher A and Flake, Alan W and Johnson, Mark P and Rintoul, Natalie E and Brown, Stephen D and Feudtner, Chris}, title = {Attitudes of paediatric and obstetric specialists towards prenatal surgery for lethal and non-lethal conditions}, volume = {44}, number = {4}, pages = {234--238}, year = {2018}, doi = {10.1136/medethics-2017-104377}, publisher = {Institute of Medical Ethics}, abstract = {Background While prenatal surgery historically was performed exclusively for lethal conditions, today intrauterine surgery is also performed to decrease postnatal disabilities for non-lethal conditions. We sought to describe physicians{\textquoteright} attitudes about prenatal surgery for lethal and non-lethal conditions and to elucidate characteristics associated with these attitudes.Methods Survey of 1200 paediatric surgeons, neonatologists and maternal{\textendash}fetal medicine specialists (MFMs).Results Of 1176 eligible physicians, 670 (57\%) responded (range by specialty, 54\%{\textendash}60\%). In the setting of a lethal condition for which prenatal surgery would likely result in the child surviving with a severe disability, most respondents either disagreed (59\%) or strongly disagreed (19\%) that they would recommend the surgery. Male physicians were twice as likely to recommend surgery for the lethal condition, as were physicians who believe that abortion is morally wrong (OR 1.75; 95\%CI 1.0 to 3.05). Older physicians were less likely to recommend surgery (OR 0.57; 95\%CI 0.36 to 0.88). For non-lethal conditions, most respondents agreed (66\% somewhat, 4\% strongly) that they would recommend prenatal surgery, even if the surgery increases the risk of prematurity or fetal death. Compared with MFMs, surgeons were less likely to recommend such surgery, as were physicians not affiliated with a fetal centre, and physicians who were religious (ORs range from 0.45 to 0.64).Conclusion Physician{\textquoteright}s attitudes about prenatal surgery relate to physicians{\textquoteright} beliefs about disability as well as demographic, cultural and religious characteristics. Given the variety of views, parents are likely to receive different recommendations from their doctors about the preferable treatment choice.}, issn = {0306-6800}, URL = {https://jme.bmj.com/content/44/4/234}, eprint = {https://jme.bmj.com/content/44/4/234.full.pdf}, journal = {Journal of Medical Ethics} }
|
__label__1
| 0.910461
|
Plastic, Fabric, and Marsh Hay Mulch with No-Till Organic Tomatoes
Sold out
SKU A4164-03
Author(s) Claire Strader, Julie Dawson.
One of the most common criticisms of organic agriculture is that it relies too heavily on tillage. While organic vegetable farmers already grow cover crops, practice crop rotation, and incorporate other techniques to counteract the negative effects of tillage, the results of this trial provide additional ideas on incorporating three supplemental mulch materials (plastic, fabric, and marsh hay) to manage soils and increase yield (8 pages; 2018).
|
__label__1
| 0.999984
|
Statement on Harmful Language in Collections, Cataloging and Description
The Wallace Library welcomes an ongoing dialogue with our history and how it has shaped our present. Our collections reflect the historical exclusion of the voices of people with disabilities, immigrants, LGBTQIA+ people, neurodiverse people, oppressed nationalities, people of color, survivors of sexual and domestic violence, women, and working class people. Their durability perpetuates structural inequity.
Users will encounter offensive or harmful language in descriptions of the works in our collection for a number of reasons.
When we create new descriptions or update old ones, we try to use terms that communities and individuals used to describe themselves, but most catalog records reuse language provided by creators, vendors, and previous owners, and the standards used to describe collections have evolved over time.
Some items retain their original descriptions to ensure that attitudes and viewpoints are not erased from the historical record, however repulsive they may be. We never censor the materials in our care, but we try to clarify instances where original language is retained by using quotation marks or providing additional historical context.
We use Library of Congress Subject Headings to facilitate access to materials in our collections. Some of these terms are offensive, and we advocate for Congress to change them. In the meantime, we replace harmful descriptions with suitable alternatives whenever possible.
We try to describe our materials with respect for all, but we are imperfect, ignorant, and biased. We will get things wrong, so we encourage feedback from our users. If you encounter language in our collections that you find offensive or harmful, please contact us at
This statement was last updated on 2021-12-09.
|
__label__1
| 0.994774
|
[Top][All Lists]
Re: @U{xxxx} -- some TeX characters with a capital don't seem to work
From: Benno Schulenberg
Subject: Re: @U{xxxx} -- some TeX characters with a capital don't seem to work
Date: Wed, 5 Jul 2017 11:45:14 +0200
Op 4-07-2017 om 18:41 schreef Gavin Smith:
On Tue, Jul 04, 2017 at 10:25:39AM +0200, Benno Schulenberg wrote:
So... what that section of texinfo.tex does is: translate a code
to a named texinfo character? But where are these texi characters
defined? Because, for example, @U{25B3} works, producing a triangle,
but I can't find @triangle anywhere in texinfo's code? Where does
it come from?
It is built into TeX (or more precisely plain TeX). This file is called
plain.tex. On my computer, it is located
at /usr/share/texmf/tex/plain/base/plain.tex, but may be elsewhere
depending on how TeX was installed.
For me the file is:
It says:
But what is that code, 0234? It isn't Unicode. So what is it
referring to?
The problem with supporting a filled diamond is that there seems to be
no glyph in the default set of fonts for TeX that corresponds to that
symbol. That's about as far as we can go with Unicode support.
It seems that XeTeX can use any Unicode character:
Now the question becomes: how do I tell pdftex to use xetex?
\diamond is already used for U+22C4 and \diamondsuit for U+2662.
The diamond suit glyph is slightly different as it is more elongated in
a vertical direction whereas the diamond symbol appears to be a square
resting on one corner. There's probably no harm in using \diamond for
both U+22C4 and U+25C7.
I don't think that is a good idea. If I specify a certain code,
and later copy-paste something out of a document and get a different
code... that's not good.
But it appears that copy-pasting out of a PDF does not work for
most special characters. A bullet works, but an "ê" becomes "^e "
and "△" becomes "4". :|
reply via email to
[Prev in Thread] Current Thread [Next in Thread]
|
__label__1
| 0.933075
|
What Are the Types and Functions of Modems?
Types of modems
Modem is a device that is used to transmit digital information through Analog systems. The term is derived from”modulator-demodulator”. Modems are categorized on the basis of two criteria:
• The first one is Data sent/unit time
• And the second one is Change in the state of the signal/unit time
The first modem was used in the ’60s decade, in order to connect over a network of telephone lines. It was 1977 whenModem was first used with a computer for transmitting data to another computer.The device is used for modulating an Analog carrier signal to carry digital information as well as for demodulating a similar signal so as for decoding the digital information from the Analog carrier signal. In this post, we will explore types and roles of modem.
Types of Modems
Internal Modems:
As the name signifies the internal modems are being connected with the motherboard of our computer. The internal modems are generally, dial-up or wireless (Wi-Fi). The telephone network is being used for sending and receiving signals in case of dial-ups.
Authentication is required for the connection. In comparison to other modems, dial-up are markedly slower. Coming to the Wi-Fi modems, there is no need to connect them with the telephone network and authentication is not required for such devices.
External Modems:
An external modem is an unconnected unit packed in a case. Basically, we connect an external modem with the telephone line and the computer through cables.
Cable Modems:
The name says it all! We have seen these sorts of modems at our homes or at cable operators place. The radio frequency that range that cable television uses is also being used by the cable modems. The using of the existing cable television infrastructure that allows the cable TV companies to provide Internet services.
ADSL Modems:
Asymmetric Digital Subscriber Line or what we call ADSL modems to use telephone lines for sending and receiving data. ASDL modems are really faster than any conventional voice band modem. The ASDL,as well as Cable modems, are used for providing the broadband internet connection. These types of modems allow more data transfer and that make the using of internet faster.
There are two types of data transmission used by Modems and those are synchronous and asynchronous. To make it more clear for you timing signals are used for Synchronous transmission and error-correcting formulas are used for asynchronous transmission. These device scan be used for one method of transmission or the other or can be used for both the ways.
What is the role of a modem? – Let’s take a look:
Data Compression:
For reducing the amount of time, it takes for sending data and for cutting down on the amount of error in the signal, modems need to employ data compression. The data compression technique decreases the size of the signal that is needed for sending the required data.
Error Correction:
This is the process in which theModem checks the information they have received is undamaged. Sometimes damage of data is being noticed in the form of altered or lost data. To get rid of this issue, the modem uses error correction. Batches of the information are being made and those frames are tagged with a checksum.
What is checksum? So, the checksum is basically and unique identity of frames. The receiving modem compiles its own checksum from the frame that is sent to it and then checksum data is being compared with it. Matching checksums results in undamaged data transmission. If they don’t match, the receiving modem sends it back and waits for the frame that the transmitting modem will re-send.
Flow Control:
The speed of sending information differs from modem to modem. There is a huge necessity of slowing down the speed of the fast modems so that the slow ones can work properly. The difference of wifi speed makes the slower modem receive more data that it is capable of processing. If this starts happening the slow modems will transmit a character to the faster one. This character would be a signal to the faster modem for Pausing the information transfer until the slow modem gets caught up.
Similarly, when the slower modem is ready to receive more data, it will send another character to the faster modems a symbol that it is now ready to receive more data. This is how the slower and the faster modems match wifi and internet speed. Now, with the use of recent models of modems we are capable of transmitting data to more hosts, and the Internet network. This shows how fast the development in the technology has taken place.
Modem plays an important role in the networking of your computer. With the changing time and improving technology the working of these devices has changed and now they are providing much better service than ever before.
Leave a Reply
Your email address will not be published.
|
__label__1
| 0.915019
|
Avocado Solid Shampoo
16.00 €
A nourishing treatment specially made for dry and frizzy hair: this avocado oil-based shampoo bar is a magic cure-all for damaged hair in need of hydration and conditioning. Definitely the eco-friendly revolution in your haircare!
What is it?
The anti-frizz and hydrating Avocado Solid Shampoo Bar is perfect for every hair type, especially for dry and damaged hair. A 100% natural, fully biodegradable and chemical-free alternative to traditional shampoos available on the market.
Ready to fall in love in 3 sentences? ;)
• A perfect balance of cleansing and hydrating ingredients leaves hair weightlessly moisturized: washing and conditioning in one creamy step has never been so easy!
• A nourishing mix of avocado oil and hamamelis: the first one strenghtens the hair fiber and is naturally rich in vitamins A, D and B, while the second one - rich in tannins and minerals - decreases the serum lipid level and treats scalp sensitivity.
• After a short adjustement period, while your hair cleans out all parabens and silicones from traditional shampoos, your hair will be completely free from chemical residues.
Why is it a good idea for a gift or... for treating yourself?
Avocado Solid Shampoo Bar is a great way to say goodbye to highly polluting plastic bottles and can’t be missing in your zero-waste journey. Definitely the perfect gift for a loved one who wants to be sustainable without giving up on healthy, shiny and silky hair. Enjoy its fruity scent and detox your hair from chemicals!
Featured ingredients
Origins with history
8 other products in the same category:
Seaweed Soap
The handmade Seaweed Soap is excellent for pampering yourself in a 100% sustainable way. Due to its natural detoxifying properties, it helps...
6.00 €
1 review
Hydrocream Q10 men
A perfect combo to reinvigorate even the most stressed skin. Enjoy the energizing effect of bio Caffeine - which improves skin circulation -...
18.90 €
The vegan gift for people with values
New Account Register
Already have an account?
Log in instead Or Reset password
|
__label__1
| 0.978435
|
Searched for: subject%3A%22C%255C-Peptide%22
(1 - 2 of 2)
Sierksma, A. (author), Patel, H. (author), Ouchi, N. (author), Kihara, S. (author), Funahashi, T. (author), Heine, R.J. (author), Grobbee, D.E. (author), Kluft, C. (author), Hendriks, H.F.J. (author), TNO Preventie en Gezondheid (author)
OBJECTIVE - Epidemiological studies suggest that moderate alcohol consumers have enhanced insulin sensitivity and a reduced risk of type 2 diabetes. Adiponectin, an adipocyte-derived plasma protein, has been found to be negatively associated with adiposity and positively associated with insulin sensitivity. Moderate alcohol consumption may...
article 2004
Finken, M.J.J. (author), Keijzer-Veen, M.G. (author), Dekker, F.W. (author), Frölich, M. (author), Hille, E.T.M. (author), Romijn, J.A. (author), Wit, J.M. (author), TNO Kwaliteit van Leven (author)
Aims/hypothesis: An increased risk of type 2 diabetes mellitus is associated with low birthweight after full-term gestation, including amplification of this risk by weight gain during infancy and adult body composition. Premature birth is also associated with insulin resistance, but studies conducted so far have not provided follow-up into...
article 2006
|
__label__1
| 0.792356
|
End of preview. Expand
in Data Studio
No dataset card yet
- Downloads last month
- 5